green laser module – Green Dot, Line, Cross Line Laser Modules

The Best Aligned 5mW to 50mW 515nm Glass Coated Lens Green Laser Diode Modules

If users are trying to make clear enough dot alignment at different work distances, it is not easy to reach with any simple manual dot projecting tool or a green laser pointer. However, after constant technical innovation of 515nm green laser diode tech and qualified glass coated lens, it is being made into a much more practically used device, such as a 515nm green laser diode module. When it makes advanced use of an external electric power source and gets proper mounting onto any other industrial machine or device, this direct diode emission made green dot laser just makes sure of high stability and highly clear green reference dot projection at various work distances.

Not the same as any prior dot positioning tool, only after easy use of an external 5V, 9V 1000mA AC/DC adapter, this 515nm green laser diode module is always working with continuous green laser beam and green reference dot projection from beam aperture. When it projects highly visible and intense green laser beam at several miles far away, without the use of sunlight, it is not only projecting highly clear green dot at close distance. In occasion that it selects high power green dot laser up to 50mW to 100mW, without the use of sunlight, it is also making highly clear dot generation within the maximum work distance of 25 meters and other high lighting working occasion as well.
On basis of the use of a qualified glass coated lens, equipping with a glass window, this 515nm green laser diode module is just performing well with highly clear and accurate green dot projection in distance. It is applying for various working environments. In addition, once it is pointing under moisture or dust, the genuine green laser dot alignment still gets no affect, and always keeps work with highly clear and accurate green reference dot projection for a lot of application fields, including laser marking machine, laser engraving machine, red laser sight, drilling system and high tech work fields etc.
Available with 16mm or 26mm diameter anodized aluminum alloy housing tube, equipping with extending electric wires, this ultra compact 515nm green laser diode module always allows easy installation, quick response and noncontact green dot projection onto any vertical or horizontal surface. Any time it gets proper output power according to real work distance and lighting occasion, after its easy adjustment of both laser beam focus and green dot projection direction, this green alignment laser just makes sure of increasing accuracy and brightness dot indication in use.

Precise Pointing 5mW 532nm Green Dot Laser Module

When dot alignment is processing with high level of accuracy and high efficiency, not workable at all to only adopt a simple green laser pointer, it should be a quite nice technical innovation to develop a 5mW 532nm green dot laser module. It is projecting the most easily absorbing green laser light from middle wavelength of 532nm green DPSS laser. Any time this industrial stabilized green laser alignment makes good use of qualified optic lens and thermal emitting system inside durable housing tube, it is able to work with highly visible green laser beam and highly clear green reference dot projection at close distance.

In various industrial precise device manufacturing work fields, 5mW 532nm green dot laser module might be used for laser marking, laser engraving machine, drilling system and other high tech work fields etc. Whatever kind of working surface it is pointing, only if green laser alignment makes good use of internal metal heat sink cooling system inside durable aircraft used aluminum alloy housing tube. Even though it is generating sensitive color green laser beam, however, within wide range operating temperature, it is still keeping work with highly intense green laser light and highly clear green reference dot projection in continuous use.
Inside the tube of 5mW 532nm green dot laser module, designing with the best quality glass coated lens, no matter green dot is projecting at long term or other special working occasions, it is still keeping work with high transmittance green laser beam emission and highly clear green dot alignment in continuous use. According to quite special use of a glass window in front of laser beam aperture, without any affecting by dust or moisture, such as rail, water or fog, this dot laser alignment is still workable with clear and highly clear green dot indication in long time use. It is just achieving up to 85% beam stability under continuous dot indication within 8 to 10 hours per day.
With the assistance of a laser alignment mounting bracket and specially use of electric wires for both 5mW 532nm green dot laser module and DC input power supply, it just enables the most convenient installation within the maximum distance of 3 meters, and convenient dot indication onto any vertical or horizontal surface. After quite easy screw of adjustable focus optic lens, this industrial stabilized alignment laser enables the most immediate green laser light concentration, and the most precise green dot alignment in all application fields perfectly.

High Temperature Resistance 532nm Green Line Laser Module

If users are trying to make extremely clear line alignment onto multiple targeting surfaces, especially in occasion of quite harsh working environments, it should be much efficient solution to make advanced use of a 532nm green line laser module. It is projecting the most sensitive color green laser light from beam aperture. When this laser line generator gets advanced use of qualified optic lens with different fan angles, after its correct installation and adjustment to correct position, it achieves highly precise line alignment onto multiple surfaces effectively.

The usual use of 532nm green line laser module might be applying for various working occasions. It employs highly durable aircraft used aluminum alloy housing tube, accepting wide range operating temperature of -10 degree to 45 degree Celsius. Whatever kind of working surface it is pointing, it is still getting super strong environmental stabilization. After basic use of inner metal heats sink cooling system, whatever kind of working surface it is pointing, this green laser line generator is achieving superior nice thermal conductivity and extremely stable green line projection continuously.
Employed by external DC input power supply, within the maximum installed distance of 3 meters, 532nm green line laser module enables free installation onto any industrial machine or device. It keeps work with highly intense green laser beam emission from beam aperture. On basis of its low laser beam divergence of less than 1mard and special TEM00 laser beam mode, green laser line is achieving extremely fine line thickness. Even though powerful green laser light is projecting from beam aperture, high power green laser is still getting perfect protection from any overheating and over current etc. The special use of APC, ACC driving circuit board is always preventing any possibility of laser module tube burning out or damage, assuring up to 85% beam stability in constant use and long lifetime.
Selected from qualified glass coated lens or separate crystal lens, available with wide range fan angles of 10 degree to 110 degree, 532nm green line laser module is projecting different size line lengths and line finenesses. After basic measurement and experiment of technical data, only if this alignment laser gets correct output power and fan angle, it makes highly precise line positioning result onto multiple targeting surfaces effectively. When users are making quite easy screw of adjustable focus optics, after immediate green laser light concentration, it achieves extremely fine line generation result onto all surfaces. When users are wearing laser safety glasses and adjust it correctly, this laser line generator makes extremely fine and clear line positioning result constantly.

Easy Pointing 50mW Green Dot Laser Module

Without any worrying about laser light decay or blur in continuous use, it should be quite efficient solution for users to make advanced use of a 50mW green dot laser module. It projects highly visible and bright green laser beam from middle wavelength of 532nm green DPSS laser system. It makes advanced use of qualified optic lens and easy adjustment of both beam focus and dot targeting direction, this green laser is becoming a genuine industrial stabilized dot-measuring tool. After quite easy installation onto desired machine or device, it makes high precision and high speed dot alignment onto all targeting surfaces effectively.

This 50mW green dot laser module is projecting quite intense and powerful green laser light from middle wavelength of 532nm green DPSS laser part. Owing to its sensitive and easily absorbing green laser light emission, and quite low laser beam divergence of no more than 1mard, it is always workable with the most compact size green reference dot projection with good round shape. Usually green laser alignment passes through quite strict laser beam stability tests up to 24 hours, such as super rapid electric current adding test, alternative high and low temperature changing test and up to 24 hours aging preventing test. It is workable with superior nice laser light cycling use and extremely clear green reference dot projection at quite long work distance and high lighting working occasion.
The desired dot alignment with 50mW green dot laser module is requiring with high accuracy and high brightness at great distance. It adopts qualified glass coated lens as its beam emitting source. Either it is pointing at great distance or quite long time, this dot laser alignment keeps high transmittance green laser light emission, and also generating extremely clear dot measuring result within the maximum distance of 25 meters. At the same time, after quite easy screw of adjustable focus optics, once the most powerful green light is focusing, it makes sure of the most precise dot measurement in distance immediately.
In multiple industrial and high tech dot measuring works, 50mW green dot laser module enables easy use as an accessory part. Specially designed with electric wires extensions for both alignment laser and DC power supply, within freely installed distance of 3 meters, noncontact green dot is easy to reach any targeting surface, without any barrier caused by long distance, high lighting and other hard reaching etc. Whenever the most powerful thermal energy is generating from beam aperture, after high attention to laser safety issue and wearing correct laser safety glasses, it makes sure of highly secured and free measurement in all industrial dot aligning work fields perfectly.

Easy Projecting Power 150mW Green Dot Laser Module

Not easily relying on any manual dot projecting device, in order to make quite easy and immediate dot positioning result at quite long work distance and other high lighting working occasions, it is becoming quite nice experience to make use of a high power 150mW green dot laser module. It is projecting high brightness and high power green laser light from beam aperture. When it is generating high sensitivity green laser light and getting quite low laser beam divergence laser beam, this dot laser alignment tool is just able to work with extremely clear and compact size green reference dot projection in distance.

This high power 150mW green dot laser module is emitting highly bright green laser light from 532nm green DPSS laser system. It is a quite advanced laser dot measuring tool. In quite long time dot measuring work, it is adopting external DC input power supply and separate metal heat sink cooling system. Comparing with formal power made laser device, it leaves even larger space for thermal emitting system. The adoption of aircraft used aluminum alloy housing tube is working perfectly with thermal conductivity. Under quite harsh working occasion of mechanical moving or calibration, it is not affecting at all, but always keeping highly reliable and stable dot positioning result in continuous use.
According to quite easy use of a DC input power supply with higher operating voltage of 12V 1000mA, high power 150mW green dot laser module is accepting operation within wide range electric current within 100V to 240V, and keeping continuous and highly clear green reference dot projection in use. When there is serious increasing temperature and serious electric current impact, the real green laser dot alignment is not affecting at all. Usually within daily continuous dot alignment work of 8 to 10 hours per day, it is getting the most efficient thermal emitting and extremely stable dot positioning result constantly.
No matter what kind of working occasion it is pointing, even though some of working place is quite complex, high power 150mW green dot laser module enables quite convenient use under the assistance of laser alignment mounting bracket. The special electric wires extension for both green alignment laser and DC power source enables convenient installation, and then generating no barrier and high speed green dot on any vertical or horizontal surface. Any possibility of eye exposure to beam aperture might cause serious hurt to human eyes. When users are remembering to wear professional laser safety glasses and avoiding eye exposure to beam aperture, high power green laser achieves high security measurement perfectly.

High Precision 532nm Green Line Projecting Alignment Laser

In order to get quite satisfied line projection onto various targeting surfaces, either it is pointed for quite close distance or long distance, any type of manual or mechanical line aligning tool might only be limited by quite long distance or hard reaching places. The genuine use of advanced 532nm green DPSS laser tech applied green line projecting alignment laser is always bringing users quite special and accurate line projection onto desired working surfaces. When this laser line generator gets easy choice of output power and optic lens degree, it is able to work with highly fine and straight green reference line projection in distance efficiently.

No matter line projecting work is processed for quite close distance or long distance, it is not affected by manual operation. Usually 532nm green line projecting alignment laser gets easy choice of output power from 5mW to 100mW. It is getting much better performance than any other manual device. When it gets constant electric power source from DC input power supply, accepting wide range electric current within 100V to 240V, after converting into 5V or 9V operating voltage, this laser line generator is always workable with highly bright and visible green reference line projection. In addition, owing to featured advantages of overheating and over current protecting functions, the genuine green laser line projection is keeping reliable performance and long lifetime as expected.
When inner part of 532nm green line projecting alignment laser is adopting glass coated lens or separate crystal lens, whatever kind of optic lens degree it is selected, it generates different line length in use. According to freely selected lens degree of 10 to 110 degree, under operation with special design part of adjustable focus optics, this green line laser module achieves quite satisfied line thickness and extremely accurate line projection at great distances and all lighting working occasions.
Without quite serious relying on manual labor force input and manual line drawing works, on condition that users are getting basic learning of line length, line thickness and work distance from beam aperture to targeting surfaces, high precision 533nm green line projecting alignment laser enables easy choices of output power and fan angle. The special use of laser alignment mounting bracket and specially designed electric wires extension just assure quite convenient installation onto any targeting surfaces, achieving noncontact and no mistake green line projection in various working fields. Only if users are paying high attention to powerful laser light and thermal energy, only after easy wearing of laser safety glasses, this alignment laser achieves no danger use perfectly.

5mW to 100mW 532nm Green Line Laser Module

In order to get quite satisfied line alignment on various targeting surfaces, not simply used for close distance, it would become quite nice experience for users to make use of 532nm green line laser module. It is projecting the most easily absorbed laser light from middle wavelength among all visible spectrums. After perfect design with inner cooling system and qualified optic lens with selected fan angle, this DC power supply made laser line generator is able to work with extremely clear and fine green reference line projection onto various targeting surfaces efficiently.

When 532nm green line laser module is being made with external electric power source, not the same as a formal alkaline battery power made laser pointer device, it is always getting quite larger space leaving for laser tube cooling down, but also keeping highly stable green reference line projection under multiple working occasions. The special use of electric wires are featured by overheating and over current protecting functions. In process of continuous green reference line projection work, only if the genuine green laser line alignment is processed within 8 to 10 hours per day, it is just keeping excellent laser light cycling use and extremely stable green reference line projection in continuous use.
Available with wide range output power from 5mW to 100mW, this Class IIIb green line laser module is always producing highly visible and bright green reference line from beam aperture. However, once it is getting quite high power up to 50mW to 100mW, it should be made with quite larger size tube diameter of 26mm. This durable aircraft used aluminum alloy housing made laser line generator gets quite larger space leaving for tube cooling down and excellent thermal conductivity. Under quite lower or higher operating temperature, it is always keeping highly bright green reference line projection onto targeting surfaces.
On basis of quite easy use of external DC input power supply, green line laser module is making continuous green reference line projection from beam aperture. The most important design part of APC, ACC driving circuit board is preventing any increasing temperature and serious electric current impact. This alignment laser just keeps excellent laser light cycling use and extremely long serving lifetime under continuous work of 8 to 10 hours per day. Whenever users are paying high attention to the most powerful green laser light and thermal energy, only after correct wearing of laser safety glasses, this line laser alignment tool achieves highly secured and free measurement constantly.

Highly Accurate Powell Lens Green Line Laser Module

When laser tech engineer is making super great technical innovation of industrial line aligning device, it is just a super great technical creation for users to make use of Powell lens green line laser module. Comparing with formal green laser pointer device, it is getting modifying laser light in type of a highly straight green reference line. Under condition that the genuine laser line alignment is processed with correct output power and optic lens degree, configured with correct operating voltage DC power supply, it is achieving the most satisfied line generation on all raw material surfaces.

Under special need of the most line alignment on multiple targeting surfaces, Powell lens green line laser module is available with wide rang optic lens degree within 10 to 93 degree. It is achieving non Gaussian distribution green laser beam from beam aperture, which is forming into highly brightness green reference line with same brightness from middle part towards both ends. The whole process of laser line alignment is achieving the finest line positioning result while comparing with formal plastic coated lens or glass coated lens, also ensuring no decay light emission in continuous work.
Whatever kind of working surfaces it is pointed, including those of quite hard reaching places, Powell lens green line laser module gets wide range output power of 5mW to 100mW, however, it is only made with quite small size tube diameter of 16mm or 26mm. This durable aircraft used aluminum alloy housing made laser line generator assures superior nice thermal conductivity. Even though some of working place gets much lower temperature than formal room, only after quite easy preheating of laser module tube within 30 seconds, it recovers highly bright and visible green reference line projection in distance immediately. In addition, only if users are selecting green laser alignment tool with higher power, it will also make sure of highly bright line alignment for black, red and dark color working surface easily.
In occasion that some of working place is not easy to reach, under the assistance of laser alignment mounting bracket, green line laser module enables the most convenient line projection on any vertical or horizontal surface. Green alignment laser line is noncontact with any raw material surface. The whole process of laser line alignment leaves no track on targeting surface, but also assuring quite convenient line generation within the maximum work distance of 25 meters. When there is quite powerful green laser light and thermal energy produced from beam aperture, after correct wearing of laser safety glasses, this industrial stabilized alignment achieves highly secured measurement perfectly.

Prompt Indicating Green Dot Laser Module

Until the time users are trying to make quite clear and accurate dot positioning result on multiple working surfaces, on consideration of various working environments, it is being considered as a quite nice recommendation for users to adopt green dot laser module. It is a quite similar laser device as a green laser pointer. However, on consideration of excellent thermal emitting system and constant electric power source, this dot laser alignment is getting excellent industrial stabilization and always able to work with highly stable and clear green reference dot projection in distance effectively.

When green dot laser module is used for quite long time, it is getting inner metal heat sink cooling system. Even though it is only able to be made with 16mm or 26mm diameter tube, however, under operation of even better thermal emitting system than formal air or water cooling, it is just achieving super nice thermal emitting. In addition, according to perfect equipment with durable aircraft used aluminum alloy housing material, even though it is used under quite low or high temperature, it is not affected at all, but also keeping highly bright green reference dot projection in continuous work. In addition, after its easy installation and adjustment to correct position, it is just keeping stable performance, not affected by any mechanical shocking or moving etc.
According to the design with qualified glass coated lens, under quite strong laser beam transmittance and quite sensitive color green laser light emission from 532nm green DPSS laser, this green dot laser module is keeping extremely clear and accurate green reference dot projection in continuous work. In addition, when dot alignment is processed under quite harsh working environments, even though there is mechanical moving, calibration or shaking etc, this alignment laser is always keeping stable dot positioning result in use.
Under the assistance of laser alignment mounting bracket, within the maximum installation distance of 3 meters, green dot laser module always enables quite easy and convenient installation on any industrial machine or device. It is getting specially designed electric wires extension for both green laser alignment and DC power supply, without any barrier caused by long distance, high lighting and other complex working environments, this alignment laser makes the most convenient dot generation on any vertical or horizontal surface. Whenever users are paying special attention to powerful green laser light and thermal energy, only after proper wearing of laser safety glasses, it achieves the most satisfied dot positioning result perfectly.

Accessory Part of 532nm Green Dot Laser Module

In any working place where users are trying to make extremely clear and quick dot alignment, no matter close distance or long distance, it is always quite nice experience for users to select 532nm green dot laser module. It is projecting highly clear and bright green laser light. Among all kinds of visible laser devices, owing to its sensitive color green laser beam emission and quite special laser beam mode of Tem00, this dot laser alignment tool is achieving good round shape and the most compact size green reference dot projection in use.

When dot alignment is proceed for quite long time, not only used for temporary positioning work, 532nm green dot laser module is being made with external DC input power supply. It is getting even better performance than formal alkaline battery power source, which is supporting green laser with continuous green reference dot projection on any working surface. Under quite special design of high temperature and strong corrosion resistance electric wires extensions, within freely installed distance of 0.3 meter to 3 meters, this alignment laser is assuring quite convenient installation, and then making quite easy and convenient green laser dot alignment continuously.
Available with wide range output power of 5mW to 100mW, 532nm green dot laser module is always generating highly visible green laser beam and green laser dot at quite long work distance. It is applied for majority working occasions, unless it is used under sunlight, high power green laser up to 50mW to 100mW would also make highly clear dot alignment under high lighting. In order to make sure of the most precise dot alignment on various targeting surfaces, only if users are making proper screw of adjustable cylindrical lens, highly intense green laser light is temporarily concentrated, producing the most compact size green laser dot in distance easily.
Whatever kind of output power it is generated, under constant increasing temperature and serious electric current impacting from laser beam aperture, 532nm green dot laser module is being made with the most important part of APC, ACC driving circuit board. The intelligent feedback system protects laser tube from any possibility of laser diode and electric driving circuit board burning out or damage, but maintaining the most stable and reliable green alignment laser dot projecting and long serving lifetime in use. Only if users are paying high attention to powerful green light and thermal energy, after proper wearing of laser safety glasses, it achieves perfect dot aligning experience constantly and perfectly.