high power green dot laser module – Green Dot, Line, Cross Line Laser Modules

High Power 532nm 200mW Green Dot Laser Module

In order to get ideal dot measuring result at quite long work distance, even though manual dot measuring tool is not easy to reach, it would be a new challenge job to make use of a high power 200mW green dot laser module. Comparing with formal output power laser device, after a bit different design of separate metal heat sink cooling system and external DC input power supply, it just leaves the largest space for laser module tube cooling down, and achieves extremely stable green reference dot projection in great distance and other high lighting working occasions.

This high power 532nm 200mW green dot laser module gets special use for industrial and high tech dot alignment work. It is projecting the most visible and the most sensitive color green laser light from 532nm green DPSS laser system. In practical laser dot alignment, even though it is operating under much lower or higher temperature than formal room temperature, green laser alignment is still keeping highly bright and intense green laser light emission and highly clear and quite small size green reference dot projection under high lighting and long distance as well.
According to quite special use of metal heat sink cooling system and DC input power supply separately, high power 200mW green dot laser module leaves the largest space for inner tube thermal emitting and increasing stability green dot alignment in continuous use. It accepts 100V to 240V electric current input DC power supply, after converting into lower operating voltage of 12V 1000mA DC powers supply, high power laser alignment just gets highly powerful green laser light emission and highly clear green dot alignment continuously. For the most important of all, the special use of electric wires have also allowed freely installing distance of 3 meters and highly stable green dot projection under any overheating and over current as well.
Whenever 532nm 200mW high power green dot laser module gets quite easy use as an accessory part, it is easy to make dot pointing onto any industrial machine or device. The special adoption of adjustable focus enables immediate green laser light focusing and the most compact size green reference dot projection. In current industrial and high tech dot aligning work, powerful green laser radiation might cause serious hurt to human eyes. When users are paying high attention to laser safety issue and wearing laser safety glasses, this alignment laser makes easy and secured measurement constantly.

Highly Clear High Power 200mW Green Dot Laser Module

If users are not able to make highly clear dot alignment at long work distance, not easily relying on any simple laser pointer or sticker, it is just becoming a major trend for users to make use of a high power 200mW green dot laser module. When it is projecting extremely visible and powerful green laser beam from laser beam aperture, only if it gets advanced use of qualified glass coated lens and separate cooling system, it achieves superior nice thermal emitting and increasing stability green reference dot projection for both great distance and high lighting working occasions etc.

When dot alignment is processing continuously, high power 200mW green dot laser module should have to work different from a simple green laser pointer. It makes advanced use of 532nm green DPSS laser system, not simply adopting simple alkaline battery power source, but selects external DC input power supply as its electric power source. It is not only workable with continuous green laser beam and green laser dot projection, but also keeping highly stable performance in multiple application fields. On basis of quite special use of electric wires, the genuine dot alignment is also getting perfect protection from overheating and over current in constant use.
Every time high power 200mW green dot laser module passes through quite strict laser beam stability tests, such as super rapid electric current adding test, alternative high and low temperature changing test and up to 24 hours aging preventing test, it is just maintaining excellent laser light cycling use and extremely clear green dot projection continuously. Owing to quite special use of glass window in front of laser beam aperture, even though dot alignment is processing under moisture or dust, this green laser alignment still keeps work with good laser light cycling use and extremely clear dot projection for any great distance or high lighting.
Whatever kind of working surface it is pointing, high power green dot laser module gets special use of APC, ACC driving circuit board. Once the most powerful green laser light and thermal energy are generating from beam aperture, it just brings serious hurt to human eyes. When this compact structure made alignment laser is properly installed and adjustment of both laser beam focus and green dot targeting direction, it makes easy and high precision dot alignment in distance. In occasion that users are paying high attention to laser safety issue and wear correct laser safety glasses, this industrial stabilized green laser alignment make safe and easy measurement continuously.

Constant Positioning High Power Green Dot Laser Module

Not simply relying on manual or mechanical dot aligning devices, whenever users are trying to make extremely clear and accurate dot alignment at quite long work distance, it would be quite nice experience for users to adopt a high power green dot laser module. Whenever users are making good use of advanced 532nm green DPSS laser tech, perfectly designed with external electric power source and thermal emitting system, high power green laser alignment tool always gets highly stable and reliable green reference dot projection in continuous work.

In any type of long distance or high lighting dot alignment works, high power green dot laser module is a very nice choice to obtain ideal dot aligning accuracy as expected. It is designed with external DC input power supply, supported by higher operating voltage of 9V DC input power supply, accepting wide range electric current within 100V to 240V, it keeps work with continuous green reference dot projection from beam aperture. Unless it is pointed under sunlight, this dot laser alignment tool with high power up to 200mW would make quite satisfied dot measuring result under high lighting and other hard reaching places as well.
Owing to its high power up to 200mW, designed with APC, ACC driving circuit board is an important design part to gets the most reliable performance in continuous work. High power green dot laser module gets special design of intelligent feedback system is preventing any increasing temperature and serious electric current impact. Under basic use of continuous green reference dot projection within 8 to 10 hours per day, after enough time leaving for laser tube cooling down, this alignment laser is always workable with the most reliable performance and long serving lifetime in proper use.
Whatever kind of working surface it is pointed, even though high power green dot laser module is used under quite complex working environments, it gets the most compact design and excellent performance under mechanical moving or calibration. Within freely installed distance of 3 meters, this alignment laser is easily installed on industrial machine or equipment, and then producing no barrier and high speed dot projection constantly. Any type of eye exposure to beam aperture might cause serious hurt to human eyes from powerful green laser light and thermal energy. Only if users are paying high attention to laser safety issue and remembering to wear proper laser safety glasses, this industrial alignment laser always achieves highly secured and easy measurement constantly.

Seriously Clear High Power Green Dot Laser Module 200mW

Whenever users are not able to make immediate and highly clear dot alignment, especially in current industrial precise device manufacturing work fields, it is never an easy job for users to get ideal dot aligning accuracy as expected. It is projecting the purest and the brightest green laser light from 532nm green DPSS laser system. When it is getting beginning high power up to 200mW and specially designed separate thermal emitting and constant electric power source supply, this high power dot laser alignment tool achieves extremely strong environmental stabilization and highly stable green reference dot projection in continuous work.

The usual use of high power green dot laser module 200mW is much different from a simple green laser pointer device. It is projecting the most easily absorbed green laser light from middle wavelength among all visible optic spectrums, after production into a real industrial stabilized green laser device, it is always workable with the highest level of accuracy green reference dot under high lighting and quite long work distance. However, in practical dot projection work, it is also a key issue to avoid operation under sunlight.
In any working occasion of the most accurate dot alignment at quite long work distance, high power green dot laser module 200mW would be used continuously and clearly onto targeting surface. The special use of qualified glass coated lens is helping a lot to achieve quite high laser beam transmittance laser light emission. According to quite simple screw of adjustable cylindrical lens, this dot laser alignment tool enables immediate green laser light concentration, and then obtaining quite compact size green reference dot projection on multiple targeting surfaces immediately.
Although high power green dot laser module 200mW is used for continuous dot projection work, it should be used for various working environments. The most special design part of APC, ACC driving circuit board is playing an important part for continuous dot projection work. Alignment laser is preventing any increasing temperature and serious electric current impacting, which is always keeping highly reliable and stable green reference dot projection in continuous work. Under continuous green reference dot projecting work within 8 to 10 hours per day, only if there is enough time leaving for laser tube cooling down, it is achieving excellent laser light cycling use and extremely stable green alignment laser dot projection. Only according to high attention to the most powerful laser light and produced thermal energy, it is a key issue to wear laser safety glasses until achieving easy and safe alignment constantly.