Not the same as any simple line positioning tool, such as a square meter or blocking board, after correct selection of advanced 532nm green line laser alignment, it is not only generating the most visible and the most sensitive color green laser light from laser beam aperture but also keeping work with highly fine and straight green reference line projection in distance. When the real line aligning work is processed without sunlight, after wide range output power of 5mW to 100mW, this laser line generator is making sure of highly clear and accurate green reference line projection for both long work distance and high lighting working occasions etc.
It might spend quite long time on prior line drawing work, while it is still not able to assure no mistake operation since it is cannot avoid mistake by manual use of any manual or mechanical line aligning device. After quite easy connect with a DC input power supply, 532nm green line laser alignment makes sure of easy and immediate green reference line projection form laser beam aperture. It is getting quite low laser beam divergence of less than 1mard, after special equipment of laser beam mode of TME00, this laser line generator is available with the finest and highest straightness green reference line projection in use.
According to perfect equipment with qualified glass coated lens or separate crystal lens, unless any worrying about laser light decay or blur in continuous work, this 532nm green line laser alignment is keeping work with high linear quality green reference line projection from laser beam aperture. When green line is pointed on wood, stone, food or textile garment, under requirement of different line length and line thickness, this laser line generator is allowing freely selected optic lens degree within 10 to 110 degree. When it is generating different line length within 0.5 meter to 6 meters, it should only be selected with correct optic lens degree and output power, this alignment laser assures the most satisfied line generation in distance.
Without any worrying about line aligning accuracy, this 532nm green line laser alignment is freely used without any mistake and serious relying on manual labor force. Owing to the most important design of APC, ACC driving circuit board, under intelligent feedback of serious electric current impacting and constant improving temperature of laser module tube, this alignment laser is not affected at all, but just keeping the most reliable green line projection in continuous work. When it is producing extremely powerful laser light and thermal energy from laser beam aperture, it might cause serious hurt to human eyes. Only after correct wearing of laser safety glasses and proper avoiding of eye exposure at close distance, this laser line generator makes sure of easy and clear measurement.
Whenever users are trying to make highly clear and fine enough line generation at quite long work distance, it is always a quite hard work before selecting quite professional line measuring tool as expected. In process of high efficiency process of any raw material, without the adoption of formal manual or mechanical line measuring device, it would be much more advance solution to try green line laser alignment. It is generating the most sensitive color green laser light from 532nm green DPSS laser part, available with the most sensitive color and the most easily absorbed green laser light emission, this wide range output power made laser line generator would make sure of highly clear and fine enough green reference line projection in distance.
It is always a quite long work distance for users to make clear enough line alignment for modern time industrial precise device manufacturing works. This green line laser alignment is available with wide range output power of 5mW to 100mW. It is not only used for quite close distance and inner room works. After the selection of high power up to 50mW to 100mW, this laser line generator is not only generating quite visible and intense green laser light, but also producing highly clear green reference line as long as 25 meters. Green light is much more visible than any other visible laser devices. In addition, when it is getting quite low beam divergence and quite special laser beam mode of TEM00, this green laser module is obtaining the best line aligning performance and the most accurate line generation for any industrial line measuring works.
According to quite easy use of qualified glass coated lens or separate crystal lens, whatever kind of working surface it is pointed, in order to get different line length and line thickness, this 532nm green line laser alignment is getting freely selected optic lens degree within 10 degree to 110 degree. Larger optic lens degree is always obtaining even longer line length in use. It is basic process of users to learn required line length, line thickness and work distance, this laser line generator will be recommended with correct output power and optic lens degree. After proper installation and adjustment, this green line laser makes sure of no mistake and no manual labor force relying line alignment constantly.
When green line laser alignment is getting constant electric power source from DC input power supply, it makes continuous green reference line targeting immediately. It is taking the lowest time consumption to make line measuring work for multiple work fields, and also getting no barrier line instruction in long term use. Only after proper installation and proper wearing of 532nm wavelength preventing laser safety glasses, this industrial stabilized alignment laser gets easy and safe measurement perfectly.