If users are trying to make highly clear and accurate cross line projection on multiple raw material surfaces, it is a quite complex job for users before selecting a quite practically used measuring device as expected. When users are employing green cross laser alignment, generating the most sensitive and the most easily absorbed green laser light from 532nm green DPSS laser part, being made with quite low beam divergence and quite low beam divergence, it is just keeping work with the finest green reference line projection in use. Every time users are making easy selection of output power and optic lens degree, unless it is used under sunlight, this industrial stabilized green laser module would make easy and accurate cross line generation in distance.
This green cross laser alignment is required to make continuous cross line generation at different work distances. It is also different from any formal manual cross line drawing or printing device. Without any mistake caused by manual operation and serious limitation of work distance, it is keeping work with highly clear and accurate two perpendicular lines with 90 degrees. Usually it is selecting AC/DC adapter as its power source, after wide range electric current within 100V to 240V, after converting into quite lower operating voltage, this cross line laser module would make continuous and highly stable green cross line projection in multiple work fields, including high temperature and strong corrosion etc.
When green cross laser alignment employs qualified glass coated lens. It is getting even better performance than formal plastic coated lens. Even though it is used for quite long distance or processed for quite long time, after quite strict laser beam stability tests up to 24 hours, it is achieving super nice laser light cycling use and just maintaining highly stable green cross line generation under multiple working occasions. According to its selected optic lens degree of 10, 15 and 110 degree, green cross line is obtaining different cross line length within 0.5 meter to 6 meters. When users are making proper adjustment of laser beam focus and green cross line thickness, this cross line laser module will make easy and rapid cross line projection in distance easily.
Whatever kind of working surface it is pointed, including those of hard reaching places, green cross laser alignment enables the easies operation with a laser alignment mounting bracket. Usually within freely installed distance of 0.3 meter to 3 meters, green laser module is freely installed on required machine or device, and then easily achieving highly accurate green cross line generation within the maximum distance of 25 meters. Whenever it is generating high intensity laser light from high power green cross line laser, users should avoid eye exposure to thermal energy and wear 532nm wavelength preventing laser safety glasses until achieving easy and quick alignment perfectly.