July 2020 – Green Dot, Line, Cross Line Laser Modules

High Uniformity Beam 50mW Green Line Laser Module

When users are trying to make extremely fine line alignment at long work distance, neither manual or mechanical line aligning tool cannot achieve requiring line aligning accuracy and efficiency as expected. After constant technical innovation of 532nm green DPSS laser tech and basic equipment with qualified separate crystal lens with different fan angles, it is just forming into a 50mW green line laser module. It projects highly visible green laser beam from laser beam aperture, after correct use of fan angle and easy connects with DC power supply, this laser line generator makes sure of extremely fine and straight-line generation onto all targeting surfaces.

The genuine line alignment with 50mW green line laser module enables easy and clear line projection after easy use of electric power source. The AC/DC adapter accepts wide range electric current of 100V to 240V, applying for various application fields, after correct converts into 9V 1000mA DC power source, this laser line generator is workable with extremely intense and powerful green laser beam emission and highly clear green line alignment at great distance effectively. At the same time, whenever powerful green laser light is generating from beam aperture, it still gets no effects by overheating and over current.
Under the most advanced use of separate crystal lens, 50mW green line laser module projects non Gaussian distribution green laser beam from laser beam aperture. It keeps work with high uniformity green laser light up to 80%. Even though green laser line alignment is processing at quite long work distance, it is still keeping work with high brightness from middle part towards both ends, achieving extremely fine line generation within the maximum work distance of 25 meters. After basic measurement of technical data and experiment, this green laser line generator gets correct selection of fan angles and highly precise line alignment at great distance effectively.
After quite easy installation onto any industrial machine or device, 50mW green line laser module makes quick and immediate line generation onto any vertical or horizontal surface. When users are making easy adjustment of laser beam focus and easy line projecting direction correctly, it makes highly precise line generation at great distance and high lighting occasions. The advanced use of APC, ACC driving circuit board is always making efficient preventing of electric current impact and serious electric current impact, achieving long lifetime and highly stability line alignment continuously. Whenever users are paying special attention to thermal hurt to human eyes and wearing correct laser safety glasses, this industrial stabilized alignment laser makes easy and safe measurement constantly.

High Temperature Resistance 532nm Green Line Laser Module

If users are trying to make extremely clear line alignment onto multiple targeting surfaces, especially in occasion of quite harsh working environments, it should be much efficient solution to make advanced use of a 532nm green line laser module. It is projecting the most sensitive color green laser light from beam aperture. When this laser line generator gets advanced use of qualified optic lens with different fan angles, after its correct installation and adjustment to correct position, it achieves highly precise line alignment onto multiple surfaces effectively.

The usual use of 532nm green line laser module might be applying for various working occasions. It employs highly durable aircraft used aluminum alloy housing tube, accepting wide range operating temperature of -10 degree to 45 degree Celsius. Whatever kind of working surface it is pointing, it is still getting super strong environmental stabilization. After basic use of inner metal heats sink cooling system, whatever kind of working surface it is pointing, this green laser line generator is achieving superior nice thermal conductivity and extremely stable green line projection continuously.
Employed by external DC input power supply, within the maximum installed distance of 3 meters, 532nm green line laser module enables free installation onto any industrial machine or device. It keeps work with highly intense green laser beam emission from beam aperture. On basis of its low laser beam divergence of less than 1mard and special TEM00 laser beam mode, green laser line is achieving extremely fine line thickness. Even though powerful green laser light is projecting from beam aperture, high power green laser is still getting perfect protection from any overheating and over current etc. The special use of APC, ACC driving circuit board is always preventing any possibility of laser module tube burning out or damage, assuring up to 85% beam stability in constant use and long lifetime.
Selected from qualified glass coated lens or separate crystal lens, available with wide range fan angles of 10 degree to 110 degree, 532nm green line laser module is projecting different size line lengths and line finenesses. After basic measurement and experiment of technical data, only if this alignment laser gets correct output power and fan angle, it makes highly precise line positioning result onto multiple targeting surfaces effectively. When users are making quite easy screw of adjustable focus optics, after immediate green laser light concentration, it achieves extremely fine line generation result onto all surfaces. When users are wearing laser safety glasses and adjust it correctly, this laser line generator makes extremely fine and clear line positioning result constantly.

High Power 532nm 200mW Green Dot Laser Module

In order to get ideal dot measuring result at quite long work distance, even though manual dot measuring tool is not easy to reach, it would be a new challenge job to make use of a high power 200mW green dot laser module. Comparing with formal output power laser device, after a bit different design of separate metal heat sink cooling system and external DC input power supply, it just leaves the largest space for laser module tube cooling down, and achieves extremely stable green reference dot projection in great distance and other high lighting working occasions.

This high power 532nm 200mW green dot laser module gets special use for industrial and high tech dot alignment work. It is projecting the most visible and the most sensitive color green laser light from 532nm green DPSS laser system. In practical laser dot alignment, even though it is operating under much lower or higher temperature than formal room temperature, green laser alignment is still keeping highly bright and intense green laser light emission and highly clear and quite small size green reference dot projection under high lighting and long distance as well.
According to quite special use of metal heat sink cooling system and DC input power supply separately, high power 200mW green dot laser module leaves the largest space for inner tube thermal emitting and increasing stability green dot alignment in continuous use. It accepts 100V to 240V electric current input DC power supply, after converting into lower operating voltage of 12V 1000mA DC powers supply, high power laser alignment just gets highly powerful green laser light emission and highly clear green dot alignment continuously. For the most important of all, the special use of electric wires have also allowed freely installing distance of 3 meters and highly stable green dot projection under any overheating and over current as well.
Whenever 532nm 200mW high power green dot laser module gets quite easy use as an accessory part, it is easy to make dot pointing onto any industrial machine or device. The special adoption of adjustable focus enables immediate green laser light focusing and the most compact size green reference dot projection. In current industrial and high tech dot aligning work, powerful green laser radiation might cause serious hurt to human eyes. When users are paying high attention to laser safety issue and wearing laser safety glasses, this alignment laser makes easy and secured measurement constantly.

Precise Used 50mW 532nm Green Dot Laser Module

In any special work field where users are trying to make clear and quick enough dot alignment at much long work distance, it is not helpful at all to only rely on manual labor force input. However, after constant work on the most practically used 532nm green DPSS laser tech and basic use of inner thermal emitting system, it is becoming a genuine and industrial stabilized laser dot alignment tool. When compact structure made green laser gets proper installation and adjustment of both laser beam focus and laser dot targeting direction, it is just making sure of easy and highly clear dot measurement at great distance effectively.

When dot alignment is continuing for quite long time, not simple used for temporary dot alignment, 50mW 532nm green dot laser module should have to be made with super nice thermal emitting. It is adopting quite compact and durable aircraft used aluminum alloy housing tube, available with featured advantages of wide range operating temperature stabilization and nice thermal conductivity, this dot laser alignment is just applying for multiple industrial and high tech dot measuring work fields. Under operation with basic use of inner metal heat sink cooling system, under operation with continuous green laser dot alignment of 8 to 10 hours per day, it is just keeping up to 85% laser beam stability within continuous use.
Whatever kind of working surface it is pointing, 50mW 532nm green dot laser module is always assuring quite high laser beam transmittance and quite low laser beam divergence of less than 1mard. It generates the most compact size green laser dot from laser beam aperture. Usually on consideration of high accuracy dot alignment continuously, it selects qualified glass coated lens. It is assuring no decay light emission in continuous use. In addition, after quite proper adjustment of laser beam focus, green laser dot is only 0.3mm at about 10cm. Even though dot alignment is processing at a bit longer distance of 2 meters, it still gets small size dot diameter of 1mm to 2mm.
Whatever kind of working surface it is pointing, 50mW 532nm green dot laser module is just operating as an accessory part. It enables quite convenient use under the assistance of laser alignment mounting bracket. The special use of electric wires enables freely installed distance of 3 meters and quite convenient dot generation within the maximum work distance of 25 meters. Any time users are operating alignment laser without sunlight and aware of laser safety issue, after correct wearing of laser safety glasses, it just makes sure of easy and highly clear dot alignment constantly.

Easy Operating Glass Lens 100mW Green Line Laser Module

Whenever users are trying to make highly clear and fine enough line alignment at much longer work distance than formal hand reaching, any manual line drawing device is not helpful at all. Any manual labor force relying used square meter or blocking board is not helpful at all, thus gradually substituting by 100mW green line laser module. It is projecting high sensitivity green laser light from middle wavelength of 532nm green DPSS laser system. Only if it gets correct selection of fan angle and proper adjustment of both laser beam focus and laser line targeting direction, this laser line generator achieves high level of accuracy line alignment onto multiple surfaces.

This 100mW green line laser module always makes excellent use of 532nm green DPSS laser tech. It is only getting middle wavelength among all visible optical spectrums. When it gets the lowest laser beam divergence of less than 1mard and quite special laser beam mode of TEM00, it is able to work with extremely fine and straight green reference line projection onto multiple targeting surfaces. In various green laser line alignment work, it should avoid operation under sunlight since human eyes cannot capture any green laser light at all.
After advanced use of qualified glass coated lens, whatever kind of working surface it is pointing, 100mW green line laser module is keeping work with high linear quality and highly straight green reference line projection in distance. It keeps work with high transmittance green laser light emission, thus assuring extremely fine and precise line alignment within the maximum work distance of 25 meters and high lighting occasions. When users are selecting correct optic lens degree, within freely selected fan angles of 10 degree to 110 degree, this laser line generator just achieves high level of accuracy line alignment for all application fields.
Whatever kind of working surface it is pointing, under operation of quite easy screw of adjustable focus optics, 100mW green line laser module makes immediate green laser light concentration and extremely fine line positioning result at great distance. With the assistance of laser alignment mounting bracket and extending electric wires extending within the maximum distance of 3 meters, noncontact green alignment laser line is easy to reach any targeting surface. In addition, according to high attention to thermal hurt to human eyes, and proper wearing of laser safety glasses, it just makes sure of easy and secured line alignment in multiple uses perfectly.