May 2020 – Green Dot, Line, Cross Line Laser Modules

Precise Aligned 50mW 532nm Green Cross Line Laser Module

If users are not able to make clear and quick enough cross line alignment at much longer work distance, not easily relying on manual or mechanical cross line alignment device, it should be much efficient solution to make use of a 50mW 532nm green cross line laser module. The genuine cross line alignment is not limiting by long work distance or high lighting working occasions. When 532nm green laser alignment makes advanced use of 532nm green DPSS laser system and qualified optic lens with different fan angle, it is workable with extremely and straight two perpendicular lines with accurate 90 degrees effectively.

This 50mW 532nm green cross line laser module is an industrial stabilized laser device. In order to get stable and reliable cross line projection in long time use, it should be made with inner metal heat sink cooling system inside high duration aircraft used aluminum alloy housing tube. Designing with larger size tube diameter of 26mm, this cross laser alignment always obtains superior nice thermal conductivity and strong environmental stabilization within wide operating temperature of -10 to 45 degree Celsius. Whatever kind of working surface it is pointing, including those of harsh working occasion of mechanical moving or calibration, it is not affecting at all.
According to advanced use of qualified glass coated lens with different fan angles of 10, 15 and 110 degree, 50mW 532nm green cross line laser module is generating different dimension cross line source in distance. It keeps work with high linear quality green cross line source. Every time this cross laser alignment passes through quite strict laser beam stability tests up to 24 hours and special use of glass window in front of laser beam aperture, it always keeping work with highly clear cross line projection and no decay light cross line alignment in long time use.
After correct selection of glass coated lens degree and special screw of adjustable focus optics, 50mW 532nm green cross line laser module enables high speed and high intensity green laser light emission and extremely fine green cross line source in great distance and all lighting occasions. Unless it is pointing under sunlight, the genuine operation of alignment laser enables easy line projection within the maximum work distance of 25 meters. When users are paying high attention to powerful green laser radiation and thermal energy hurt to human eyes, every time users are wearing correct laser safety glasses, this green cross laser makes sure of highly secured and accurate measurement perfectly.

Adjustable Focus 100mW Green Line Laser Module

Whatever kind of working occasion users are trying to make extremely clear and fine line projection at quite long work distance, it is never an easy job before selecting a quite nice line measuring tool as expected. Without any serious relying on manual labor force input and extra time spending on line drawing or line printing works, the use of 100mW green line laser module always makes quite satisfied line projection for all industrial and high tech line measuring works. When this laser line generator makes advanced use of qualified optic lens with different fan angle and basic use of inner cooling system, it is able to work with extremely fine and stable green reference line projection.

Any type of manual line drawing or line printing work is only applying for quite close distance, while still not able to avoid mistake caused by manual operation. However, after advanced use of 100mW green line laser module and easy connect with external DC input power supply, it keeps wok with continuous green reference line projection from beam aperture. It is an industrial stabilized laser device. Accepting wide range electric current within 100V to 240V, after proper conversion into 5V or 9V DC Power supply, this laser line generator just keeps work with highly clear green reference line projection and perfect protection from any overheating and over current in continuous use.
On basis of the most advanced use of qualified optic lens, either it is adopting glass coated lens or separate crystal lens, 100mW green line laser module keeps work with high linear quality and highly straight green reference line. Usually before this alignment laser is available on the market, it has passed through quite strict laser beam stability tests up to 24 hours. For instance, after a series of strict tests, including super rapid electric current adding test, alternative high and low temperature changing test and up to 24 hours aging preventing test, the genuine green laser line alignment just keeps work with excellent laser light cycling use and extremely clear green reference line projection in constant use.
Under basic learning of line length, line fineness and work distance from laser beam aperture to targeting surface, 100mW green line laser module should pass through basic measurement and calculation, which would get correct selection of optic lens degree correctly. At the same time, owing to quite easy screw of adjustable focus optics, this alignment laser enables immediate green laser light focusing and extremely fine green line projection at great distance and high lighting occasions. Whatever kind of working surface it is pointing, even though there is serious thermal energy projecting from beam aperture, users should wear correct laser safety glasses and avoiding eye exposure to beam aperture until achieving the most satisfied line projection in all occasions.

Easy Pointing 50mW Green Dot Laser Module

Without any worrying about laser light decay or blur in continuous use, it should be quite efficient solution for users to make advanced use of a 50mW green dot laser module. It projects highly visible and bright green laser beam from middle wavelength of 532nm green DPSS laser system. It makes advanced use of qualified optic lens and easy adjustment of both beam focus and dot targeting direction, this green laser is becoming a genuine industrial stabilized dot-measuring tool. After quite easy installation onto desired machine or device, it makes high precision and high speed dot alignment onto all targeting surfaces effectively.

This 50mW green dot laser module is projecting quite intense and powerful green laser light from middle wavelength of 532nm green DPSS laser part. Owing to its sensitive and easily absorbing green laser light emission, and quite low laser beam divergence of no more than 1mard, it is always workable with the most compact size green reference dot projection with good round shape. Usually green laser alignment passes through quite strict laser beam stability tests up to 24 hours, such as super rapid electric current adding test, alternative high and low temperature changing test and up to 24 hours aging preventing test. It is workable with superior nice laser light cycling use and extremely clear green reference dot projection at quite long work distance and high lighting working occasion.
The desired dot alignment with 50mW green dot laser module is requiring with high accuracy and high brightness at great distance. It adopts qualified glass coated lens as its beam emitting source. Either it is pointing at great distance or quite long time, this dot laser alignment keeps high transmittance green laser light emission, and also generating extremely clear dot measuring result within the maximum distance of 25 meters. At the same time, after quite easy screw of adjustable focus optics, once the most powerful green light is focusing, it makes sure of the most precise dot measurement in distance immediately.
In multiple industrial and high tech dot measuring works, 50mW green dot laser module enables easy use as an accessory part. Specially designed with electric wires extensions for both alignment laser and DC power supply, within freely installed distance of 3 meters, noncontact green dot is easy to reach any targeting surface, without any barrier caused by long distance, high lighting and other hard reaching etc. Whenever the most powerful thermal energy is generating from beam aperture, after high attention to laser safety issue and wearing correct laser safety glasses, it makes sure of highly secured and free measurement in all industrial dot aligning work fields perfectly.