January 2020 – Green Dot, Line, Cross Line Laser Modules

Quick Response 100mW Green Dot Laser Module

In any special working occasion of the most accurate dot projection at great work distances and high lighting working occasions, in order to get quite satisfied dot measuring result as expected, it is always quite nice experience to make use of a 100mW green dot laser module. It generates the most visible and the most easily absorbed green laser light from beam aperture. When it gets quite low laser beam divergence and quite special laser beam mode of Tem00, this dot laser alignment tool achieves quite small size and good round shape green reference dot projection onto various targeting surfaces efficiently.

When dot alignment work is processing with a high power 100mW green dot laser module, it adopts quite larger size tube diameter of 26mm. In long time continuous dot projecting works, it is always a key issue to maintain high stability dot projection. The high duration aircraft used aluminum alloy housing made green laser alignment tool gets quite larger space leaving for inner metal heat sink cooling system. It gets superior nice thermal conductivity and ensuring extremely stable and reliable green reference dot projection in continuous use.
Comparing with any other visible laser devices, 100mW green dot laser module emits much sensitive color green laser light. Once the real operating temperature is much lower than room temperature, users should make preheating of laser tube within 30 seconds, this alignment laser will recover highly bright and visible green reference dot projection in continuous use. Owing to quite special use of qualified glass coated lens, on basis of quite high laser beam transmittance and quite strict laser beam stability tests up to 24 hours, this dot laser alignment tool maintains excellent laser light cycling use and highly clear green reference dot in distance.
Only after quite easy use of 9VDC input power supply, 100mW green dot laser module makes immediate and highly bright green reference dot projection in constant use. The special design of APC, ACC driving circuit board is preventing any increasing temperature and serious electric current impacting, always ensuring the most stable and reliable green laser dot projection in long time use. On basis of the highest attention to powerful laser radiation and reflection, only after proper wearing of laser safety glasses and avoiding eye exposure to laser beam aperture, high precision alignment laser achieves high security and quick response dot measurement constantly.

Complex Beam Glass Lens Green Cross Line Laser Module

Not simply adopting any manual or mechanical cross line projecting device, in order to get highly accurate and precise cross line alignment onto various targeting surfaces, it would be quite efficient solution to make good use of a highly bright beam green cross line laser module. When it is projecting the most easily absorbed green laser light and quite complex laser beam in type of two perpendicular lines with accurate 90 degrees, this cross laser alignment tool allows easy choice of output power and optic lens degree. Only if it is properly installed and adjusted, it makes quite satisfied green cross line projection in distance.

When green cross line laser module gets special use of qualified glass coated lens, not the same as a formal dot or line projecting laser device, it is projecting even more complex laser beam in type of two perpendicular lines with accurate 90 degrees. After the use of qualified glass coated lens, available with different fan angle of 10, 15 and 110 degree, this cross laser alignment tool is projecting much complex laser beam in type of two perpendicular lines with accurate 90 degrees. When users are getting correct selection of output power and fan angle, it is able to work with desired cross line length and thickness, and then projecting quite satisfied cross line targeting results at different work distances and all lighting working occasions.
According to quite special use of durable aircraft used aluminum alloy housing tube, equipped with inner metal heat sink cooling system, either it is using 16mm or 26mm diameter tube, green cross line laser module achieves superior nice thermal conductivity and good thermal emitting and stable green cross line projection within wide range operating temperature. Either it is applying under quite lower or higher operating temperature, the real green cross line alignment is not affecting at all, but still keeping excellent laser light cycling use under any harsh working occasion of serious mechanical shocking or moving etc.
Whatever kind of working surface it is pointing, including quite harsh working environments, glass lens green cross line laser module enables quite easy use with the assistance of a laser alignment mounting bracket. It is making quick and immediate green cross line source projecting. In addition, under quite easy screw of laser beam aperture, every time laser beam focus is concentrated, this alignment laser achieves quite satisfied cross line projection in distance. When users are paying high attention to powerful laser radiation and reflection, after proper wearing of laser safety glasses, it achieves high security measurement perfectly.

High Uniformity 520nm 5mW Green Line Laser Module

In any working occasion where users are trying to make the most accurate and easiest line projection at quite close distance, not simply relying on any manual or mechanical line aligning devices, it would become a nice experience to make use of a high uniformity 520nm 5mW green line laser module. It projects forest green laser beam from 520nm green laser beam directly, after basic use of inner cooling system and constant electric power source with correct operating voltage, this laser line generator is able to work with highly clear and accurate forest green reference line projection in close distance effectively.

uniform 5mW 520nm green line laser module

It projects less brightness green laser beam than 532nm green DPSS laser system. However, once it is keeping work with direct laser light emission from inner laser diode, available with the same output power, this 520nm green line laser module always gets even more stable and reliable green reference line projection in continuous use. It is adopting 16mm diameter aircraft used aluminum alloy housing tube, designed with super nice thermal emitting from inner metal heat sink cooling system, this laser line generator always gets superior nice thermal conductivity and highly clear forest green reference line projection in continuous use.
Comparing with formal plastic coated lens or glass coated lens, whatever kind of working surface it is pointed, after adoption of separate crystal lens, 5mW 520nm green line laser module is workable with highly uniform distribution green laser beam from beam aperture, and generating highly fine green line in use. When it is getting the same brightness green reference line from middle part towards both ends, under operation with quite strict laser beam stability tests up to 24 hours, this laser line generator is workable with high level of accuracy line projection onto different working surfaces efficiently.
Within the lowest time consumption and relying on professional skills, only if 520nm green line laser module is easily connecting with DC input power supply, it makes no mistake and quick response green reference line projection in use. For the most important of all, according to quite easy adjustment of laser beam focus, every time green laser light is focused, this high precision alignment laser makes easy and quick line projection easily. This direct diode emission green laser device with correct selection of optic lens degree also achieves quite satisfied measuring result for all kinds of industrial and high tech alignments.

High Precision 532nm Green Line Projecting Alignment Laser

In order to get quite satisfied line projection onto various targeting surfaces, either it is pointed for quite close distance or long distance, any type of manual or mechanical line aligning tool might only be limited by quite long distance or hard reaching places. The genuine use of advanced 532nm green DPSS laser tech applied green line projecting alignment laser is always bringing users quite special and accurate line projection onto desired working surfaces. When this laser line generator gets easy choice of output power and optic lens degree, it is able to work with highly fine and straight green reference line projection in distance efficiently.

No matter line projecting work is processed for quite close distance or long distance, it is not affected by manual operation. Usually 532nm green line projecting alignment laser gets easy choice of output power from 5mW to 100mW. It is getting much better performance than any other manual device. When it gets constant electric power source from DC input power supply, accepting wide range electric current within 100V to 240V, after converting into 5V or 9V operating voltage, this laser line generator is always workable with highly bright and visible green reference line projection. In addition, owing to featured advantages of overheating and over current protecting functions, the genuine green laser line projection is keeping reliable performance and long lifetime as expected.
When inner part of 532nm green line projecting alignment laser is adopting glass coated lens or separate crystal lens, whatever kind of optic lens degree it is selected, it generates different line length in use. According to freely selected lens degree of 10 to 110 degree, under operation with special design part of adjustable focus optics, this green line laser module achieves quite satisfied line thickness and extremely accurate line projection at great distances and all lighting working occasions.
Without quite serious relying on manual labor force input and manual line drawing works, on condition that users are getting basic learning of line length, line thickness and work distance from beam aperture to targeting surfaces, high precision 533nm green line projecting alignment laser enables easy choices of output power and fan angle. The special use of laser alignment mounting bracket and specially designed electric wires extension just assure quite convenient installation onto any targeting surfaces, achieving noncontact and no mistake green line projection in various working fields. Only if users are paying high attention to powerful laser light and thermal energy, only after easy wearing of laser safety glasses, this alignment laser achieves no danger use perfectly.

Gaussian Beam Emitting 5mW Green Line Laser Module

Not simply used for temporary or quite close distance line projecting works, any manual or mechanical line aligning tool can be helpful at all. In order to make easy and quite convenient line projection at quite close distance, under operation with an advanced 532nm 5mW green line laser module and quite easy use of external DC input power supply, it makes immediate and highly clear green reference line projection for close distance and inner room working conditions. When this industrial stabilized laser line generator gets easy selection of optic lens degree and correct installation onto any industrial machine or device, it makes easy and convenient line projection as expected.

When line projecting work is processed in multiple working occasions, 5mW green line laser module enables quite easy use. It is only adopting quite small size tube diameter of 16mm. After the adoption of durable aircraft used aluminum alloy housing tube and inner metal heat sink cooling system, this laser line generator achieves superior nice thermal emitting. It is projecting the most sensitive color and easily absorbed green laser light from beam aperture. However, once it is pointed under quite lower or higher temperature, it is an easy job to make preheat of laser module tube within 30 seconds, which will recover highly bright green reference line projection in close distance immediately.
In order to get quite efficient line projection onto various targeting surfaces and require low production cost for any industrial precise device manufacturing works, 5mW green line laser module gets the use of qualified glass coated lens. It is generating quite high beam transmittance green laser light emission. On basis of quite easy adjustment of laser beam focus, the most concentrated green laser light ensures the smallest size green dot projection as expected. For the most important of all, when green laser alignment passes through quite strict laser beam stability tests up to 24 hours, under proper use by skilled users and professional users, it maintains high level of accuracy green line projection and long lifetime.
Under operation with a laser alignment mounting bracket and specially designed electric wires extension for 532nm green line laser module and DC input power supply, it is able to use within the maximum installation distance of 3 meters, and then generating a highly clear and straight green reference line onto any vertical or horizontal surface. Green alignment laser line is easily reaching any targeting surface, and making quite satisfied line positioning result for any laser cutting, textile garment processing, sand milling and other high tech works etc.