December 2019 – Green Dot, Line, Cross Line Laser Modules

Adjusted Thickness 520nm 5mW Green Line Laser Module

Not simply relying on prior line printing or line drawing works, whenever users are trying to make quick and accurate enough lien projection onto various targeting surfaces, none of manual or mechanical line aligning tools can be comparable with a 520nm 5mW green line laser module. It is not the same as a formally used 532nm green DPSS laser system. When it is keeping highly bright forest green laser light from 520nm green laser diode, after basic equipment with inner metal heat sink cooling system inside highly durable metal housing tube, this laser line generator is just workable with highly clear and stable green reference line projection in constant use.

The genuine line alignment work with 520nm 5mW green line laser module is different formal a quite simple line drawing device. After correct use of an external DC input power supply with 5V operating voltage, it is keeping work with continuous green reference line projection from beam aperture. It is accepting wide range electric current, without any limitation of thermal emitting space and extra time spending on battery change, this laser line generator is always workable with constant green reference line projection from beam aperture. This laser line alignment tool is able to work within daily operating time of 8 to 10 hours, under operation with enough time leaving for laser tube cooling down, it is keeping highly reliable performance and long serving lifetime in use.
When line alignment work is processed for quite long time, not the same as a formal laser pointer device, 520nm 5mW green line laser module gets excellent use of inner metal heat sink cooling system and APC, ACC driving circuit board. Under operation with constant output power and electric current supply, without any worrying about laser light decay or blur in constant use, this line laser alignment tool achieves good laser light cycling use and the clearest green reference line projection onto any vertical or horizontal surface constantly.
On basis of easy selection of qualified glass coated lens or separate crystal lens, within 10 to 110 degree fan angles, 520nm 5mW green line laser module obtains different line length and line thickness in use. For the most important of all, when users are making easy screw of adjustable cylindrical lens, this alignment laser gets the most focused laser light and the finest green reference line projection in use. Usually within the maximum installation distance of 3 meters and easy adjustment of line targeting direction, it achieves no barrier and no mistake line projection perfectly.

The Finest Separate Crystal Lens Green Line Laser Module

Usually without quite long time spending on prior line drawing or line printing with a quite simple square meter or triangular mete, it is always a quite easy job for user to get extremely fine and accurate line projection with the assistance of a separate crystal lens green line laser module. It is generating quite low beam divergence green reference line from beam aperture. When this laser line generator gets basic designed thermal emitting system and continuous electric power source from DC input power supply, it is able to work with highly fine and straight green reference line projection onto targeting surfaces easily.

Whenever line alignment is processed for multiple working environments, even though some of working surface is not easy to reach, however, green line laser module always gets quite nice performance for any industrial precise device manufacturing works. Within wide range output power from 5mW to 100mW, it is only being made with quite small size tube diameter of 16mm or 26mm. When laser line generator gets high power up to 50mW to 100mW, it is selecting larger size tube of 26mm. The special use of aircraft used aluminum alloy housing tube is working perfectly with inner metal heat sink cooling system, under condition that it gets nice thermal conductivity and wide range operating temperature stabilization, it is always workable with highly stable and reliable green reference line projection in continuous work.
No matter what kind of working surface it is pointed, once green line laser module is equipped with the best quality separate crystal lens, it is always workable with non Gaussian distribution green laser beam from beam aperture, and then generating a highly straight and fine green reference line from beam aperture. It is not only keeping the brightest line projection, but also keeping same brightness from middle part towards both ends, without any appearance of laser light decay or dim in continuous work.
Only after quite easy screw of adjustable cylindrical lens, green line laser module always gets immediate green laser light concentration, and then projecting extremely fine and straight red reference onto targeting surface. When it is producing the most visible green laser beam from beam aperture, users should only learn enough of desired line length, line thickness and work distance, this alignment laser would be recommended with correct output power and optic lens degree until achieving the most satisfied line projection in distance. Only if users are paying high attention to powerful laser light from high power green laser up to 50mW to 100mW, after wearing of laser safety glasses, this laser line generator achieves easy and free use constantly.

Constant Positioning High Power Green Dot Laser Module

Not simply relying on manual or mechanical dot aligning devices, whenever users are trying to make extremely clear and accurate dot alignment at quite long work distance, it would be quite nice experience for users to adopt a high power green dot laser module. Whenever users are making good use of advanced 532nm green DPSS laser tech, perfectly designed with external electric power source and thermal emitting system, high power green laser alignment tool always gets highly stable and reliable green reference dot projection in continuous work.

In any type of long distance or high lighting dot alignment works, high power green dot laser module is a very nice choice to obtain ideal dot aligning accuracy as expected. It is designed with external DC input power supply, supported by higher operating voltage of 9V DC input power supply, accepting wide range electric current within 100V to 240V, it keeps work with continuous green reference dot projection from beam aperture. Unless it is pointed under sunlight, this dot laser alignment tool with high power up to 200mW would make quite satisfied dot measuring result under high lighting and other hard reaching places as well.
Owing to its high power up to 200mW, designed with APC, ACC driving circuit board is an important design part to gets the most reliable performance in continuous work. High power green dot laser module gets special design of intelligent feedback system is preventing any increasing temperature and serious electric current impact. Under basic use of continuous green reference dot projection within 8 to 10 hours per day, after enough time leaving for laser tube cooling down, this alignment laser is always workable with the most reliable performance and long serving lifetime in proper use.
Whatever kind of working surface it is pointed, even though high power green dot laser module is used under quite complex working environments, it gets the most compact design and excellent performance under mechanical moving or calibration. Within freely installed distance of 3 meters, this alignment laser is easily installed on industrial machine or equipment, and then producing no barrier and high speed dot projection constantly. Any type of eye exposure to beam aperture might cause serious hurt to human eyes from powerful green laser light and thermal energy. Only if users are paying high attention to laser safety issue and remembering to wear proper laser safety glasses, this industrial alignment laser always achieves highly secured and easy measurement constantly.

5mW to 100mW 532nm Green Line Laser Module

In order to get quite satisfied line alignment on various targeting surfaces, not simply used for close distance, it would become quite nice experience for users to make use of 532nm green line laser module. It is projecting the most easily absorbed laser light from middle wavelength among all visible spectrums. After perfect design with inner cooling system and qualified optic lens with selected fan angle, this DC power supply made laser line generator is able to work with extremely clear and fine green reference line projection onto various targeting surfaces efficiently.

When 532nm green line laser module is being made with external electric power source, not the same as a formal alkaline battery power made laser pointer device, it is always getting quite larger space leaving for laser tube cooling down, but also keeping highly stable green reference line projection under multiple working occasions. The special use of electric wires are featured by overheating and over current protecting functions. In process of continuous green reference line projection work, only if the genuine green laser line alignment is processed within 8 to 10 hours per day, it is just keeping excellent laser light cycling use and extremely stable green reference line projection in continuous use.
Available with wide range output power from 5mW to 100mW, this Class IIIb green line laser module is always producing highly visible and bright green reference line from beam aperture. However, once it is getting quite high power up to 50mW to 100mW, it should be made with quite larger size tube diameter of 26mm. This durable aircraft used aluminum alloy housing made laser line generator gets quite larger space leaving for tube cooling down and excellent thermal conductivity. Under quite lower or higher operating temperature, it is always keeping highly bright green reference line projection onto targeting surfaces.
On basis of quite easy use of external DC input power supply, green line laser module is making continuous green reference line projection from beam aperture. The most important design part of APC, ACC driving circuit board is preventing any increasing temperature and serious electric current impact. This alignment laser just keeps excellent laser light cycling use and extremely long serving lifetime under continuous work of 8 to 10 hours per day. Whenever users are paying high attention to the most powerful green laser light and thermal energy, only after correct wearing of laser safety glasses, this line laser alignment tool achieves highly secured and free measurement constantly.

Excellent Aligned 515nm Green Laser Diode Module

Not simply relying on manual dot projecting with a simple green laser pointer or a simple sticker, whenever users are trying to make quite convenient and accurate dot alignment for industrial precise device manufacturing work fields, it is just a quite nice experience for users to make use of 515nm green laser diode module. It is an advanced 515nm green laser diode tech applied laser dot alignment. Whenever it is getting continuous electric power source of DC input power supply and making quite easy adjustment of laser beam focus, it is able to work with extremely clear and accurate green reference dot projection in use easily.

When dot alignment work is processed continuously, 515nm green laser diode module should be designed differently from a quite simple green laser pointer device. It is employing import 515nm green laser diode as its beam emitting source. It is not as bright as 532nm green DPSS laser, however, it is always getting even more stable dot projection work. This 515nm green dot laser is getting selected output power from 5mW to 50mW, owing to its quite high thermal consumption, it should be equipped with higher operating voltage. Within wide range output power of 30mW to 50mW, after correct use of 9V DC input power supply, this dot laser alignment tool will assure bright and visible green reference dot projection in distance immediately.
Whatever kind of working surface it is pointed, 515nm green laser diode module is always required to generate extremely clear dot projection. According to quite special use of glass coated lens, on basis of quite high laser beam transmittance and import laser diode tech, after production into a real dot laser alignment tool, it is just keeping highly clear dot projection and increasing beam stability in continuous work. In addition, accruing to quite easy adjustment of laser beam focus, it gets freely adjusted dot diameter and the most accurate dot positioning result on multiple targeting surfaces.
In multiple industrial and high tech dot aligning work fields, under the assistance of laser alignment mounting bracket, this 515nm green laser diode module enables quite easy installation, and then producing highly clear dot generation on any vertical or horizontal surface. Owing to quite special use of glass window in front of laser beam aperture, even though it is used under moisture or dust working condition, this alignment laser is still keeping easy and convenient use. Only if users are paying high attention to the most powerful and intense laser light and thermal energy, after correct use of laser safety glasses, green dot laser obtains no mistake dot alignment constantly.

Qualified Optic Lens 520nm Green Line Laser Module

Whenever users are trying to make immediate and highly clear line alignment on multiple targeting surfaces, not simply used with a square meter, blocking board or triangular meter, it is always becoming a major trend for users to make use of a 520nm green line laser module. It is projecting highly clear and bright forest green laser beam from beam aperture. Not the same as 532nm green DPSS laser system, although it is not getting quite high power, however, it is keeping direct laser light emission from 520nm green laser diode, and always maintaining highly stable and reliable forest green reference line projection in distance.
The real line alignment with 520nm green line laser module is much easier than formal line drawing or line printing works. At the same time, only if it is connected with an external DC input power supply, it is able to work with continuous green reference line projection from beam aperture, without extra time spending on prior line positioning work. Under wide range electric current from 100V to 240V, this laser line generator is applied for majority country and regions, which is also getting featured advantages of overheating and over current protection functions.

According to basic design of qualified optic lens, either glass coated lens or separate crystal lens, this 520nm green line laser module is always generating high linear quality and high straightness forest green reference line from beam aperture. When it is trying to make highly clear line alignment on various targeting surfaces, this laser line alignment tool enables freely selected fan angles within 10 to 110 degree. It is projecting different line length within 0.5 meter to 6 meters. Every time users are getting basic learning of line length, line thickness and work distance from beam aperture to targeting surfaces, only if it is selected with correct output power and optic lens degree, it is always making no mistake line generation on any vertical or horizontal surface.
When 520nm green line laser module gets the most important design part of adjustable focus, every time users are making quite easy screw of adjustable cylindrical lens, it assures immediate forest green laser light concentration and extremely fine and straight green reference line projection in distance immediately. Within the maximum installation distance of 3 meters, this compact structure made alignment laser is able to be installed on any other machine or device, and always keeping no barrier and high speed green line projection in distance easily.

Seriously Clear High Power Green Dot Laser Module 200mW

Whenever users are not able to make immediate and highly clear dot alignment, especially in current industrial precise device manufacturing work fields, it is never an easy job for users to get ideal dot aligning accuracy as expected. It is projecting the purest and the brightest green laser light from 532nm green DPSS laser system. When it is getting beginning high power up to 200mW and specially designed separate thermal emitting and constant electric power source supply, this high power dot laser alignment tool achieves extremely strong environmental stabilization and highly stable green reference dot projection in continuous work.

The usual use of high power green dot laser module 200mW is much different from a simple green laser pointer device. It is projecting the most easily absorbed green laser light from middle wavelength among all visible optic spectrums, after production into a real industrial stabilized green laser device, it is always workable with the highest level of accuracy green reference dot under high lighting and quite long work distance. However, in practical dot projection work, it is also a key issue to avoid operation under sunlight.
In any working occasion of the most accurate dot alignment at quite long work distance, high power green dot laser module 200mW would be used continuously and clearly onto targeting surface. The special use of qualified glass coated lens is helping a lot to achieve quite high laser beam transmittance laser light emission. According to quite simple screw of adjustable cylindrical lens, this dot laser alignment tool enables immediate green laser light concentration, and then obtaining quite compact size green reference dot projection on multiple targeting surfaces immediately.
Although high power green dot laser module 200mW is used for continuous dot projection work, it should be used for various working environments. The most special design part of APC, ACC driving circuit board is playing an important part for continuous dot projection work. Alignment laser is preventing any increasing temperature and serious electric current impacting, which is always keeping highly reliable and stable green reference dot projection in continuous work. Under continuous green reference dot projecting work within 8 to 10 hours per day, only if there is enough time leaving for laser tube cooling down, it is achieving excellent laser light cycling use and extremely stable green alignment laser dot projection. Only according to high attention to the most powerful laser light and produced thermal energy, it is a key issue to wear laser safety glasses until achieving easy and safe alignment constantly.