June 2019 – Green Dot, Line, Cross Line Laser Modules

Seriously Accurate DC Power Green Line Laser Alignment

Whenever users are trying to make highly clear and fine enough line generation at quite long work distance, it is always a quite hard work before selecting quite professional line measuring tool as expected. In process of high efficiency process of any raw material, without the adoption of formal manual or mechanical line measuring device, it would be much more advance solution to try green line laser alignment. It is generating the most sensitive color green laser light from 532nm green DPSS laser part, available with the most sensitive color and the most easily absorbed green laser light emission, this wide range output power made laser line generator would make sure of highly clear and fine enough green reference line projection in distance.

It is always a quite long work distance for users to make clear enough line alignment for modern time industrial precise device manufacturing works. This green line laser alignment is available with wide range output power of 5mW to 100mW. It is not only used for quite close distance and inner room works. After the selection of high power up to 50mW to 100mW, this laser line generator is not only generating quite visible and intense green laser light, but also producing highly clear green reference line as long as 25 meters. Green light is much more visible than any other visible laser devices. In addition, when it is getting quite low beam divergence and quite special laser beam mode of TEM00, this green laser module is obtaining the best line aligning performance and the most accurate line generation for any industrial line measuring works.
According to quite easy use of qualified glass coated lens or separate crystal lens, whatever kind of working surface it is pointed, in order to get different line length and line thickness, this 532nm green line laser alignment is getting freely selected optic lens degree within 10 degree to 110 degree. Larger optic lens degree is always obtaining even longer line length in use. It is basic process of users to learn required line length, line thickness and work distance, this laser line generator will be recommended with correct output power and optic lens degree. After proper installation and adjustment, this green line laser makes sure of no mistake and no manual labor force relying line alignment constantly.
When green line laser alignment is getting constant electric power source from DC input power supply, it makes continuous green reference line targeting immediately. It is taking the lowest time consumption to make line measuring work for multiple work fields, and also getting no barrier line instruction in long term use. Only after proper installation and proper wearing of 532nm wavelength preventing laser safety glasses, this industrial stabilized alignment laser gets easy and safe measurement perfectly.

Highly Visible Non Gaussian 532nm Green Line Laser Module

In order to get clear enough line alignment on multiple targeting surfaces, and assure high level of accuracy line alignment on multiple raw material surfaces, none of manual and mechanical line drawing or printing device can be comparable with 532nm green line laser module. It is generating the most visible green laser light and green reference line from laser beam aperture. When it is trying to make continuous line alignment on multiple working surfaces, this laser line generator should only be equipped with correct output power and optic lens degree. After correct installation and adjustment of line thickness, it will make sure of easy and highly clear line projection on any targeting surface.

Whatever kind of working surface it is pointed, under condition of the finest line emission, this 532nm green line laser module is equipped with the best quality separate crystal lens. It is keeping work with non Gaussian distribution green laser light from beam aperture. Even though green reference line is pointed at quite long work distance, it is still keeping the same line brightness from middle part towards both ends. When this laser line generator is getting the lowest laser beam divergence of less than 1mard, green reference line is just keeping the finest line thickness in use.
According to basis measurement of line length, line thickness and work distance from laser beam aperture, laser tech engineer would make basic calculation and experiment, this 532nm green line laser module would be recommended with correct output power and optic lens degree until achieving quite satisfied line generation in distance. For the most important of all, according to quite easy adjustment of laser beam focus, this laser line generator gets easy adjustment of line thickness until achieving quite satisfied line generation in distance. For instance, green reference line is only 1mm to 2mm thickness at 2 meters work distance from beam aperture. Even though green alignment laser line is pointed at quite long work distance of 25 meters, it is still keeping quite satisfied line measurement under multiple working occasions.
When green reference line is pointed on those of quite hard reaching places, this 532nm green line laser module is still getting easy operation under the assistance of laser alignment mounting bracket. Users can make quite easy adjustment of line targeting direction and install it within freely installed distance within 0.3 meter to 3 meters, this alignment laser always assures the most precise measurement in long term use. After proper wearing of laser safety glasses and avoiding eye exposure to beam aperture, intense light emitted laser device still assures clear measurement constantly.

DC Power Made High Power Green Dot Laser Alignment

When laser tech engineer is developing much more practically used laser device, such as a high power green dot laser alignment, it is not only generating quite intense and powerful green laser light from beam aperture, but also keeping highly clear and accurate green reference dot projection at quite long work distance and high lighting occasions easily. It is making excellent use of advanced 532nm green DPSS laser tech, beginning with high power up to 200mW and separate metal heat sink cooling system, this green laser module ensures the best thermal emitting and the most stable green reference dot projection in long term use.

Comparing with formal low power laser device, high power green dot laser alignment gets extremely high power up to 200mW. It is equipped with much higher operating voltage of 9V DC input power supply as its beam emitting source. When it is accepting wide range electric current within 100V to 240V, in majority of country and regions, it is quite easy to use and install, and then keeping highly clear and bright green reference dot projection constantly. According to quite special design part of high temperature and strong corrosion resistance designed electric wires for both green laser module and DC power supply, it is applied for multiple working occasion and maintaining highly stable green reference dot projection in continuous work.
When dot aligning work is processed for military targeting, drilling system, laser medical therapy and other high tech work fields, high power green dot laser alignment should be used under multiple working environments. It is getting high duration aircraft used aluminum alloy housing tube, within wide range operating temperature and any other harsh working environments, this laser diode module is keeping work stably. If the genuine dot aligning work is processed under lower temperature than formal room, users should only make quite easy preheating of laser module tube, it will recover highly clear green reference dot projection in distance immediately.
This high power green dot laser alignment should be used as an accessory part of any other industrial machine or device. Within freely installed distance of 0.3 meter to 3 meters, green dot projection is maintaining easy and convenient dot projection, without any barrier in constant work. Whenever quite powerful and intense green laser light and thermal energy are produced from laser beam aperture, this alignment laser should be used without eye exposure and wearing laser safety glasses until achieving easy and clear measurement constantly.

Easy Measured High Power 532nm Green Cross Line Laser Module

If users are not finding quite efficient cross line alignment solut immediately, unless the adoption of any formal manual or mechanical cross line aligning devices, it is a major trend for users to adopt a high power 532nm green cross line laser module. It is generating the most sensitive and the most easily absorbed green laser light from 532nm green DPSS laser part. When it is trying to make continuous cross line alignment, this green cross laser should be connected with DC input power supply and installed correctly on required machine or device, which will make quite easy and highly accurate cross line alignment in distance effectively.

In order to get clear and accurate enough cross line alignment on multiple targeting surfaces, high power 532nm green cross line laser module is equipped with quite high quality glass coated lens. It is different from formal dot or line projecting devices, but just in need to generate quite complex laser beam in type of two perpendicular lines with accurate 90 degrees. It is always required to continue for quite long time. When laser tech engineer is designing this cross laser alignment tool, it is also passing through quite strict laser beam stability tests. According to quite rapid electric current adding test and up to 24 hours aging preventing test, it is keeping work with extremely strong environmental stabilization and highly stable green vertical and horizontal lines projection in distance.
If users are trying to make continuous cross line alignment, this high power green cross line laser module is operated as an accessory part. Both green laser and DC input power supply are being made with electric wire extension within 0.3 meter to 3 meters, which is quite easy to be installed on industrial machine or device. It is also making no barrier dot generation, and also leaving no track on any raw material surface. This cross laser alignment is not used for temporary work, but getting quite wonderful cross line alignment for laser alignment for screen printing system, military targeting, scientific research and lab experiment works etc.
Without any serious relying on professional skills and serious time spending on manual labor force input, high power 532nm green cross line laser module takes the lowest time spending to make real cross line generation in distance. It is a necessity to learn enough of cross line length, thickness and work distance from beam aperture, this alignment laser will make the most accurate green cross line generation for long distance and high lighting effectively. If users are paying high attention to quit intense green light and thermal energy, after professional wearing of laser safety glasses, this industrial stabilized green cross laser gets safe and free measurement constantly.

Constant Power Source 532nm Green Line Laser Module

When line alignment work is processed at quite long work distance, it is not helpful at all for users to only use manual line drawing device. At the same time, laser tech engineer has never stopped the mind of developing the most practically used line alignment tool, such as a 532nm green line laser module. It is getting even better thermal emitting from formal laser pointer. Under operation with constant electric power source of DC input power supply and correct selection of output power and optic lens degree, this laser line generator is keeping work with highly clear and fine line emission in distance efficiently.

The real line alignment is always processed for quite long time, while still requiring high level of beam stability in continuous work. This 532nm green line laser module employs DC input power supply as beam emitting source. The specially designed electric wires extension are high temperature and strong corrosion resistance, which would ensure highly stable and reliable green reference line projection in multiple working occasions. In addition, under freely installed distance of 0.3 meter to 3 meters, this accessory part of laser line generator is use freely and conveniently, which will make highly clear green reference line projection on any vertical or horizontal surface.
In any working occasion where users are making highly clear line alignment on raw material surface, 532nm green line laser module is equipped with the most qualified glass coated lens or separate crystal lens. It is generating quite high linear quality green reference line in distance. In process of line measuring on different raw material surfaces, after freely selected optic lens degree within 10 degree to 110 degree, green reference line is obtaining different line length in use. When it is getting different line length within 0.5 meter to 6 meters, and different line thickness, this alignment laser is fulfilling high level of accuracy line alignment for laser cutting, textile garment processing, sand milling and wooden board processing works etc.
Without any serious relying on professional skills, the operation of 532nm green line laser module is getting no limitation of work distance, height and other complex working environments etc. On basis of the most important design part of adjustable focus, highly intense green light is easily converting into highly fine green reference line in use, and then achieving no mistake line alignment within the maximum work distance of 25 meters. Whenever users are avoiding eye exposure to laser beam aperture and remembering to wear professional laser safety glasses, this industrial stabilized alignment laser assures high accuracy line alignment constantly.

Efficient Measured APC Driving 515nm Green Laser Line Generator

If there is not a quite efficient solution for user to get highly clear line alignment at quite longer work distance than formal hand reaching, more and more engineers and factory workers would prefer to choose a high brightness beam emitted 515nm green laser line generator. When it is generating highly bright green laser light directly from 515nm green laser diode and equipped with basic thermal emitting from metal heat sink cooling inside its aluminum alloy housing tube, this laser line alignment tool becomes a real and practically used laser devices. Whenever it is installed and adjusted to correct position, it will make sure of highly clear and fine enough line indication on any raw material surface effectively.

It might spend quite long time to make line printing works with a simple square meter, blocking board or triangular meter etc. When users are trying to make continuous line alignment on multiple raw material surfaces, in order to obtain high work efficiency, 515nm green laser line generator is just a perfect substitute for any manual line device. When it is adopting external DC input power supply, it is accepting wide range electric current within 100V to 240V. Owing to quite special design part of high temperature and strong corrosion resistance electric wires extension for both green laser module and DC power source, it is always keeping highly reliable and stable green reference line projection in constant use.
When 515nm green laser line generator gets selected output power within 5mW to 50mW, it is applied for highly clear line generation at different work distances. A 5mW green laser module is enough to make clear line alignment at quite close distance and inner room working occasion, while high power green line laser up to 30mW to 50mW would make highly clear green reference line indication under high lighting and long distance. At the same time, this 515nm green line laser is taking even higher thermal consumption than 532nm green DPSS laser system. Only if high power laser device is designed with quite higher operating voltage of 9V DC input power supply, it will make immediate and highly clear green line projection in use.
Without any serious relying on professional skills or quite long time spending on prior line positioning work, this 515nm green laser line generator is always assuring no mistake line positioning result in real use, which is also not affected by manual operation work. This accessory part is being used for any type of industrial precise device manufacturing works and lab experiment works etc. Whenever high power alignment laser is selected up to 50mW, in order to assure free and secure measurement, users should avoid eye exposure and wear professional laser safety goggles until achieving clear and free measurement constantly.