April 2019 – Green Dot, Line, Cross Line Laser Modules

Instant Measured DC Power Green Laser Diode Module

In multiple industrial and high tech dot alignment work fields, it is not workable at all for users to only use a simple laser pointer or other sticker to make clear dot alignment on desired working surfaces. However, under operation with advanced 532nm green DPSS laser tech applied green laser diode module, only after quite easy connect with a DC input power supply, it is just making sure of immediate and highly clear green reference dot projection in distance efficiently. Usually this green dot laser is getting quite compact structure and quite wide range operating temperature stabilization, after quite proper installation and adjustment, it makes sure of easy and quick dot generation in distance effectively.

Instead of use of any simple laser pointer, this green laser diode module is adopting DC input power supply, which is not only leaving enough space reserving as its thermal emitting system, but also keeping continuous green reference dot projection in use. Whatever kind of working surface it is pointed, this green dot laser is accepting wide range electric current within 100V to 240V, but also bearing those of harsh working occasion, such as high temperature and strong carrions etc. After easy connect with electric power source, it keeps work with continuous dot alignment. However, only after enough time leaving for laser module tube cooling down, this alignment laser can make sure of good laser light cycling use and highly stable dot generation in constant work.
When green laser diode module is installed properly on desired machine or device, it is just easy to operate. On basis of specially designed electric wires extension for both green laser and DC input power supply, within freely installed distance of 0.3 meter to 3 meters distance, it can be installed easily and then getting the most convenient dot generation on any vertical or horizontal surfaces. Under condition that the proper laser dot alignment work is proceed within 8 to 10 hours per day, it is getting the best protection of inner laser diode and electric driving circuit board, and then achieving extremely long serving lifetime in use.
With the assistance of laser alignment mounting bracket, even though it is pointed on some of quite hard reaching places, green laser diode module gets no barrier dot generation on any other vertical or horizontal surface. Noncontact green alignment laser dot targeting is allowing easy adjustment of laser beam focus and dot targeting direction, just bringing users quite convenient and accurate dot generation within the maximum work distance of 25 meters without sunlight. In occasion that users are paying special attention to powerful green light and thermal energy, after proper wearing of laser safety glasses, this alignment laser just achieves easy and safe use constantly.

Intelligent Feedback Designed Green Dot Laser Alignment

Without serious relying on professional skills or any worrying about mistake caused by manual operation, in order to get quite satisfied dot generation on any raw material surface, it is just becoming a quite easy work to use a green dot laser alignment. It is emitting the most easily absorbed green laser light from 532nm green DPSS laser part, owing to quite low beam divergence and special laser beam mode of TEM00, this laser diode module is just achieving the most compact size and good round shape green reference dot projection in use. Only after quite easy connect with an external electric power source, this 532nm green laser makes sure of immediate and highly clear dot projection on any raw material surface.

When users are trying to make continuous dot projection on any raw material surface, it is not workable to only use a simple green laser pen. However, the generating beam of green dot laser alignment is not the same as it. It is adopting external electric power source from DC input power supply, without any special time spending on battery power source, this green laser module makes sure of continuous green dot projection in use. At the same time, when dot measuring work is processed under special occasion of high temperature or strong corrosion, it is not affected at all, but just keeping the most reliable green dot projection up to 80% up to 8 to 10 hour’s continuous work.
Within wide range output power of 5mW to 100mW, green dot laser alignment is being made with 16mm and 26mm diameter tube. It is being made with high duration aircraft used aluminum alloy housing tube, under operation of quite harsh occasion of mechanical shocking, calibration or moving, green laser dot projection is still keeping work perfectly. This is a quite sensitive green light emitted laser device, under operation of quite lower operating temperature than formal room, it is necessary for users to make quite easy preheating of laser module tube, this laser diode module will recover highly bright and visible green dot projecting quickly.
Whatever kind of output power it is selected, green dot laser alignment might cause immediate tube temperature increasing. The special design part of intelligent feedback system from APC, ACC driving circuit board assures constant electric power source, and also preventing serious electric current impacting, and then maintaining highly stable green dot projection and excellent laser light cycling use in continuous work. Whenever users are paying special attention to intense green light and avoiding eye exposure to beam aperture, after proper wearing of laser safety glasses, this industrial stabilized green dot laser would make sure of easy and free measurement constantly.

Elite Measured Tool of Green Cross Laser Alignment

If users are trying to make highly clear and accurate cross line projection on multiple raw material surfaces, it is a quite complex job for users before selecting a quite practically used measuring device as expected. When users are employing green cross laser alignment, generating the most sensitive and the most easily absorbed green laser light from 532nm green DPSS laser part, being made with quite low beam divergence and quite low beam divergence, it is just keeping work with the finest green reference line projection in use. Every time users are making easy selection of output power and optic lens degree, unless it is used under sunlight, this industrial stabilized green laser module would make easy and accurate cross line generation in distance.

This green cross laser alignment is required to make continuous cross line generation at different work distances. It is also different from any formal manual cross line drawing or printing device. Without any mistake caused by manual operation and serious limitation of work distance, it is keeping work with highly clear and accurate two perpendicular lines with 90 degrees. Usually it is selecting AC/DC adapter as its power source, after wide range electric current within 100V to 240V, after converting into quite lower operating voltage, this cross line laser module would make continuous and highly stable green cross line projection in multiple work fields, including high temperature and strong corrosion etc.
When green cross laser alignment employs qualified glass coated lens. It is getting even better performance than formal plastic coated lens. Even though it is used for quite long distance or processed for quite long time, after quite strict laser beam stability tests up to 24 hours, it is achieving super nice laser light cycling use and just maintaining highly stable green cross line generation under multiple working occasions. According to its selected optic lens degree of 10, 15 and 110 degree, green cross line is obtaining different cross line length within 0.5 meter to 6 meters. When users are making proper adjustment of laser beam focus and green cross line thickness, this cross line laser module will make easy and rapid cross line projection in distance easily.
Whatever kind of working surface it is pointed, including those of hard reaching places, green cross laser alignment enables the easies operation with a laser alignment mounting bracket. Usually within freely installed distance of 0.3 meter to 3 meters, green laser module is freely installed on required machine or device, and then easily achieving highly accurate green cross line generation within the maximum distance of 25 meters. Whenever it is generating high intensity laser light from high power green cross line laser, users should avoid eye exposure to thermal energy and wear 532nm wavelength preventing laser safety glasses until achieving easy and quick alignment perfectly.

Direct Line Targeting Non Gaussian Beam Green Line Laser Module

When users are trying to get highly clear and accurate line alignment at much longer work distance than formal hand reaching distance, it should be quite nice solution to try blue line laser module. It is a high intensity beam emitted laser line alignment tool. In occasion that it is equipped with the most qualified separate crystal lens, it is generating non Gaussian beam distribution and high uniformity blue reference line in distance. According to quite easy adjustment of laser beam focus and blue line thickness, this laser line generator would always make sure of highly clear and fine line generation under multiple working environments.

This green line laser module is emitting the most sensitive color green laser light from 532nm green DPSS laser system. When it is getting quite low beam divergence of less than 1mard, whatever kind of working surface it is pointed, green reference line is available with high fineness. For instance, when it is trying to work at quite long work distance, green line thickness is only 1mm to 2mm at about 2 meters distance. At even closer distance line alignment work fields, green line thickness is only 0.3mm at about 10cm distance from beam aperture. Every time users are making quite easy adjustment of laser beam focus, green line thickness is freely adjusted, and then achieving the most accurate line projection within the maximum distance of 25 meters.
Inside the tube of green line laser module, the use of qualified separate crystal lens gets even better performance than formal glass coated lens or plastic coated lens. It is keeping work with wide range optic lens degree of 10 to 93 degree, which is obtaining different green line length within 0.5 meter to 6 meters. In process of highly clear line alignment, it is keeping the same line brightness from middle part towards both ends, which is also getting no appearance of laser light decay or blur in use.
Every time users are learning enough of line length, line thickness and work distance from beam aperture, laser tech engineer would always recommend users green line laser module with correct output power and optic lens degree. Unless it is used under sunlight, high power alignment laser would also be used for quite high lighting working occasion as well. Whatever kind of working surface it is pointed, under operation with serious intense laser light and thermal energy are produced from bema aperture, it is an important issue to pay high attention to laser safety measure and wear 532nm wavelength preventing laser safety glasses until achieving easy and quick use perfectly.

Changeable Line Thickness of Non Gaussian Green Line Laser Module

If users are not able to find a quite efficient and accurate line aligning solution for any type of industrial and high tech line aligning work fields, none of formal line printing or line drawing from manual line alignment tool is workable at all. However, in order to improve work efficiency for any type of high tech and industrial line measuring work fields, it is just becoming a much more preferred choice to select green line laser module. It is emitting the most sensitive color green light from 532nm green DPSS laser system. Equipped with excellently designed thermal emitting system and constant power source from DC input power supply, this laser line generator is keeping work with clear and stable line instruction in any working occasion effectively.

It is quite a long time to make line printing work, which is also not able to avoid mistake by manual operation. In process of highly clear and accurate line alignment on various targeting surfaces, green line laser module is just bringing users totally different experience for any type of industrial line measuring works. According to easy connect with DC input power supply, within wide range electric current within 100V to 240V, after converting into much lower voltage of 3V and 9V operating voltage, this laser line generator would always make sure of highly bright and visible green laser light from wide range power of 5mW to 100mW. Only if the genuine green laser line alignment is processed within sunlight, green laser line will make clear line instruction within the maximum work distance of 25 meters easily.
Selected from wide range optic lens degree of 10 degree to 110 degree, green line laser module with glass coated lens is generating high linear quality green reference line in use. Usually it is allowing quite easy adjustment of laser beam focus, only after quite rapid concentration of green laser light, this laser line generator would make sure of the finest and the most satisfied line instruction on any vertical or horizontal surfaces. Available with wider range line length within 0.5 meter to 6 meters, it is fulfilling high level of accuracy line generation on any vertical or horizontal surfaces immediately.
Either industrial or high tech line alignment work fields, green line laser module is getting easy use as an accessory part. When it is getting extending electric wires for both green laser and DC power supply, it is getting easy installation and adjustment within 0.3 meter to 3 meters, which is making sure of the most convenient line generation on any raw material surface. In occasion that users are paying high attention to laser safety measure and remember to wear laser safety glasses, this industrial green line laser makes sure of free and easy use constantly.

The Finest Line Thickness 532nm Green Line Laser Module

If there is quite special need of highly clear and accurate line alignment on multiple raw material surfaces and different work distances, it is not a kidding job for users to only select simple line printing device. In addition, on basis of constant work on the most practically used 532nm green DPSS laser tech and basic equipment with thermal emitting system, 532nm green line laser module would become a quite nice and efficient method for users to get clear line projection in distance. Unless it is used under sunlight, it is only an easy work for users to select laser line generator with correct output power and optic lens degree, which makes no mistake line alignment on any vertical or horizontal surfaces easily.

When 532nm green line laser module is applied for multiple industrial and high tech line alignment works, it is required to generate different line length and line thickness in distance. In order to make sure of highly clear line alignment all the time, it is equipped with the most qualified glass coated lens or separate crystal lens. According to basic learning of line length, line thickness and work distance from beam aperture to real work surface, laser tech engineer has just made basic test and calculation, this laser line generator is easily achieving high level of accuracy line alignment on any vertical or horizontal surface immediately.
Designed with wide range optic lens degree of 10 to 110 degree, 532nm green line laser module keeps work with high linear quality green reference line projection with within wide range line length of 0.5 meter to 6 meters. It is keeping work with quite low beam divergence of less than 1mard, on basis of the most special TEM00 laser beam mode, this laser line generator would be workable with the finest green reference line projection in distance. If line alignment distance is much longer, green line thickness might become larger. In occasion that users are operating laser line generator within the maximum work distance of 25 meters, this laser line generator makes sure of high accuracy line projection.
Owing to special designed electric wires extension for both 532nm green line laser module and DC input power supply, it is getting freely installed distance within 0.3 meter to 3 meters, which is making sure of rapid and no barrier line positioning result on any raw material surfaces. In occasion of highly clear line alignment with high power green alignment laser, it is a necessity for users to pay special attention to laser safety measure and wear 532nm wavelength preventing laser safety glasses so as to achieve easy and free measurement constantly.

The Clearest Aligned High Power Green Dot Laser Alignment

When users are fallen into serious worrying about how to get highly clear dot projection at quite long work distance, it is always a quite advanced solution for users to try advance laser tech applied device. There is not any longer an end for users to only develop formal green laser pointer. When laser tech engineer is paying high attention to technical innovation and advanced development of 532nm green DPSS laser tech, the generation of high power green dot laser alignment would be workable with improving beam stability and highly clear green reference dot projection under long distance and high lighting working occasions effectively.

Not the same as a formally used laser pointer, the operation of high power green dot laser alignment would be used for quite long time. It is not used temporarily, but should be working together with other machine or device. Usually, it is adopting separate metal heat sink cooling system, not the same as formal power made green laser module device, there is even larger space reserving as its cooling system. Together with the most durable aircraft used aluminum alloy housing tube, this high power green dot laser obtains superior nice thermal conductivity, which is also keeping the most stable and reliable green reference dot projection under mechanical shocking, calibration or moving etc.
Comparing with formal visible laser devices, high power green dot laser alignment is generating the most sensitive color green light to human eyes. Unless it is being used under sunlight, it is keeping work with clearest green reference dot projection under all lighting working occasions. However, when green laser light is pointed on dark, black and red color working surface, green light might be absorbed by background seriously. Only if this alignment laser is selected with quite higher power than actual need, it would easily make sure of clear enough green reference dot projection in continuous work.
Owing to beginning high power of 200mW, high power green dot laser alignment is generating quite powerful and intense green light from beam aperture. When there is quite rapid temperature increasing of laser module tube, on basis of the most important design part of APC, ACC driving circuit, this alignment laser ensures constant output power and electric current supply, ensuring the most stable green dot projection in continuous work. In order to maintain excellent laser light cycling use and extremely long serving lifetime, the genuine use of green laser module is allowing operation within 8 to 10 hours, which is achieving high accuracy dot projection in multiple occasions effectively. Under operation with high attention to laser safety measure and proper wearing of 532nm wavelength preventing laser safety glasses, high power green laser makes sure of high security use perfectly.