February 2019 – Green Dot, Line, Cross Line Laser Modules

The Most Accurate APC Controlled Green Line Laser Module

Without any worrying about real work distance, high height and other complex working environments, more and more factory workers and engineers would prefer to choose a green line laser module to make constant and accurate line projection in any working occasion. It is making good use of advanced 532nm green DPSS laser tech, owing to quite sensitive color laser light emission from beam aperture and excellently designed thermal emitting system, this laser line generator is just being used with high stability green reference line projection in distance easily.

The genuine operation of green line laser module is not limited by any working environments. It is being made with the most durable aircraft used aluminum alloy housing tube, once it is workable under harsh working occasion of strong shocking, calibration or moving, this durable structure made green laser allows quite easy installation on any working surface, and then obtaining highly stable green reference line projection within wide range operating temperature as well. In occasion that line alignment is processed under low temperature, users should only make easy preheating of laser module tube, this laser line generator will recover highly bright green reference line projection immediately.
In process of highly accurate line alignment on multiple raw material surfaces, green line laser module is employing the most qualified glass coated lens or separate crystal lens. It is generating high linear quality green reference line projection from beam aperture. In occasion that users are trying to make the most accurate line alignment in distance, after the adoption of the most qualified separate crystal lens, laser line generator keeps work with highly uniform distribution green laser beam, and then obtains a highly straight and fine green reference line with the same line brightness from milled part towards both ends.
Under operation with a laser alignment mounting bracket, including those of hard reaching and complex working environment, green line laser module is easily installed and adjusted, within freely installed distance of 0.3 meter to 3 meters, it is easily reaching any targeting surface, and also obtaining the most accurate line projection for multiple working environments, including laser cutting, sand milling, textile garment processing and other high tech applied fields etc. In occasion that laser line generator is being made with APC, ACC driving circuit board, under efficient preventing of electric current preventing, it is just obtaining high stability green reference line projection within daily operating time of 8 to 10 hours.

Immediate Positioning Tool of 515nm Green Laser Diode Module

After the adoption of advanced 515nm green laser diode tech applied dot measuring device, such as a green laser diode module, it is not only keeping generation with direct green laser light emission from beam aperture, but also keeping high level of beam stability in continuous green reference dot projection in continuous work. This laser dot alignment tool is getting much shorter wavelength than 532nm green DPSS laser device, however, after its design with quite compact structure, it is still workable with even more stable performance and highly clear dot generation in distance.

The operation of 515nm green laser diode module is quite similar with a green laser pointer. However, once dot alignment work is processed for quite long time, laser tech engineer has just developed this laser device with super strong industrial stabilization. Inside its compact structure, there is enough space leaving for metal heat sink cooling system. Equipped with metal housing tube, this laser dot alignment tool obtains superior nice thermal conductivity, and also keeping highly reliable green dot projection in long term use. When it is being used within wide range operating temperature of -10 degree to 45 degree Celsius, this green laser just keeps highly reliable performance and bright enough green dot projection easily.
When 515nm green laser diode module is selected with higher power up to 30mW to 50mW, it is taking even higher thermal consumption, which should be equipped with quite higher operating voltage of 9V DC input power supply. At the same time, it is adopting larger size tube diameter of 26mm, after obtaining larger space reserving as its cooling system, this high power green laser makes sure of highly clear and accurate dot generation in distance effectively. In order to get the most satisfied dot generation on multiple raw material surfaces, this alignment laser allows quite easy adjustment of laser beam focus. When high intensity green laser light is concentrated, it will make sure of the most satisfied dot projection in distance.
Whatever kind of output power it is selected, being made with most important design part of APC, ACC driving circuit board, 515nm green laser diode module makes sure of constant electric current supply and the most efficient preventing of electric current impacting, and then achieving highly stable green dot projection in long term use. In process of continuous dot alignment work, whenever powerful green light is generated from beam aperture, users should pay high attention to laser safety issue and wear 515nm wavelength preventing laser safety glasses until achieving highly accurate and free dot measuring result perfectly.

Immediate Measured 532nm Glass Lens Green Line Laser Module

After the adoption of advanced laser tech applied 532nm green line laser module, without any time spending on manual line drawing or line printing device, it is always a quite easy and efficient line generation work for various industrial and high tech line alignment works. It is a great technical innovation of advanced 532nm green DPSS laser tech, after its production with thermal emitting system and constant power source from DC input power supply, this laser line generator just keeps work with continuous green reference line projection in distance and other occasions efficiently.

In practical industrial machinery processing works, line alignment is processed under multiple working environments. This green line laser module is selecting the most durable aircraft used aluminum alloy housing tube. Within wide range operating temperature and quite harsh working occasion, the genuine green reference line projection is not affected at all. Under operation of strong mechanical shocking, calibration or moving work etc, after quite easy installation and adjustment, this laser line generator is still keeping stable enough line projection in continuous work. Usually green laser and DC power source are designed with extending electric wires, within freely installed distance of 0.3 meter to 3 meters, it gets quite convenient installation and adjustment, and easily making sure of accurate and fine line projection without barrier caused by long distance, high height, and other complex working environments etc.
After the selection of high quality glass coated lens, selected of 10 degree to 110 degree, green line laser module is achieving different line length within 0.5 meter to 6 meters. Whatever kind of working surface, green reference line projection is still keeping high fineness and high straightness, which is also keeping good beam stability under long term continuous work. Selected from line length within 0.5 meter to 6 meters, this laser line generator is applied for multiple work fields, including laser cutting , textile garment processing, sand milling and wooden board processing works etc.
Within wide range output power of 5mW to 100mW, green line laser module is not only generating highly bright green laser beam at several miles, but also projecting extremely clear green line projection within maximum distance of 25 meters. This industrial stabilized alignment laser passes through a series strict tests, within daily operating time of 8 to 10 hours, it is getting reduced possibility of laser tube burning out and still maintaining long serving lifetime in any industrial and high tech measuring works etc. Only according to proper wearing of 532nm wavelength preventing laser safety glasses and avoid eye exposure to beam aperture, this laser line device just gets no mistake line alignment perfectly.

Highly Clear Beam Green Cross Line Laser Module

In order to get quite convenient and accurate cross line generation on multiple targeting surfaces, unless the use of any formal manual cross line drawing work, such as mechanical cross line aligning or mechanical cross line alignment device, it is a quite nice solution for user to use a high brightness green cross line laser module. It is projecting the most visible and the brightest green light from 532nm green DPSS laser part, being equipped with qualified glass coated lens, it is generating quite complex and accurate two perpendicular lines with accurate 90 degrees.

Whatever kind of working surface, including close distance, long distance and high lighting working occasions, green cross line laser module is getting freely selected output power within 5mW to 100mW. It is projecting visible green laser beam from 532nm green DPSS laser part, reaching highly clear green light at several miles far away. Unless it is being used under sunlight, high power green laser up to 50mW to 100mW will be workable with clear enough cross line generation under long distance and high lighting occasions. Usually in occasion that users are in need of quite accurate line generation in use, on basis of quite fine line thickness, this cross laser alignment tool is only allowing operation within the maximum work distance of 25 meters.
Owing to special design with aircraft used aluminum alloy housing material, this green cross line laser module is keeping work under quite wide range operating temperature. Even though cross line alignment is processed under lower temperature than room, users should only make simple preheating of laser module tube, it will recover its bright and visible enough green two perpendicular lines with accurate 90 degrees. When this alignment laser is being made with quite durable structure of only 16mm and 26mm, after easy installation, it still keeps highly stable cross line generation under mechanical shocking, calibration or moving etc.
No matter what kind of targeting surface, after the design of qualified glass coated lens, green cross line laser module is keeping generation of high laser beam transmittance and highly clear cross line generation in distance. According to quite strict beam stability tests up to 24 hours, it is obtaining superior nice laser light cycling use and highly clear green vertical and horizontal line generations in long term work. Under condition that users are operating this alignment laser within 8 to 10 hours per day, after enough time reserving for laser module tube cooling down, it is maintaining good performance in any high tech and precise device manufacturing works perfectly.

High Straightness 532nm Glass Lens Green Line Laser Module

Whatever kind of industrial and high tech line alignment work fields, under the assistance of a high brightness green line laser module, it would be much easier work for users to get clear and accurate line projecting on any targeting surface. This is a genuine and qualified line measuring device, which is making high linear quality and high straightness green reference line projection in distance. When this laser line generator is selected with correct output power and optic lens degree, unless it is used under sunlight, it makes super rapid and clear line generation on any vertical and horizontal surface effectively.

Owing to the selected output power within 5mW to 100mW, 532nm green line laser module is generating highly visible green laser beam at several miles far away. Comparing with any other visible laser devices, this middle wavelength laser device is generating the most sensitive color and easily absorbed green light from beam aperture. Under formal lighting close distance line alignment work, 5mW green laser module is enough to get clear line projection in use. Once it is selected with high power up 50mW to 100mW, it will be workable at quite long distance and high lighting occasion. Within the maximum work distance of 25 meters, this laser line generator is assuring super fine line thickness, and guaranteeing high level of accuracy line projection easily.
In order to get highly clear line projection on multiple targeting surfaces, the operation of 532nm green line laser module should learn enough of line length, line thickness and work distance from beam aperture. Selected from qualified glass coated lens or separate crystal lens, no matter what kind of working surface it is pointed, it is keeping high linear quality and high fineness. Available with wide range optic lens degree of 10 degree to 110 degree, it is obtaining highly straight green reference line within 0.5 meter to 6 meters line length. When users are making easy screw of laser beam aperture, this focused beam made laser line generator gets easy adjustment of line thickness, which will easily get fine enough line of only 1mm to 2mm at about 2 meters distance in use.
Anytime green line laser module is applied for multiple industrial and high tech line alignment works, it is merely used separately, but being used as an accessory part of other device or equipment. Owing to specially design of electric wires for both alignment laser and DC power supply, within freely installed distance of 0.3 meter to 3 meters, this laser line generator makes sure of convenient and high speed line generation in distance. According to high attention to powerful green light and thermal energy, after proper wearing of 532nm wavelength preventing laser safety glasses, it makes sure of the most secured and accurate line alignment perfectly.

Mature Laser Diode Tech Applied 515nm Green Laser Line Generator

If there is quite long time spending on prior line positioning work, it is far more enough to only use simple line printing device, such as a simple square meter or blocking board. In process of quite accurate and rapid line alignment on various targeting surfaces, it would be the most marvelous experience for users to use a 515nm green laser line generator. When it is generating highly intense and bright green laser beam directly from 515nm green laser diode, on basis of direct laser light emission from 515nm green laser diode and excellent thermal emitting system, it is just becoming a real industrial stabilized laser line alignment device.

When line alignment work is processed for quite long time, formal line drawing or line printing device cannot be workable at all. However, the generating beam from 515nm green laser line generator is different from any manual or mechanical line aligning device etc. It is getting wide range output power from 5mW to 50mW, besides its highly visible green laser beam emission at several miles, it is also workable with highly clear forest green line projection in distance easily. In any occasion where users are trying to make quite accurate line projection with super fine and straight line aligning result, this green laser module is only allowing operation with the maximum work distance of 25 meters.
Not the same as formally used 532nm green DPSS laser, once 515nm green laser line generator is available with quite high power of 30mW to 50mW, it is taking even higher thermal consumption. Only if it is workable with even higher operating voltage of 9V DC input power supply, it will make sure of highly stable and reliable green reference line projection in continuous work. In process of constant line alignment under high temperature and strong corrosion, this alignment laser is not affected at all, but just maintaining excellent laser light cycling use and the most accurate green reference line projection in long term use.
Whatever kind of working surface, including those of complex and hard reaching working places, 515nm green laser line generator is just used as an accessory part. After the use of a laser alignment mounting bracket, within freely adjusted line targeting direction within three dimensions, it is making quite convenient and easy line generation on any vertical or horizontal surface quickly. Whenever users are paying high attention to powerful green light and thermal energy, after proper wearing of 515nm wavelength preventing laser safety glasses, this alignment laser makes sure of rapid and no mistake line generation perfectly.