January 2019 – Green Dot, Line, Cross Line Laser Modules

Continuous Aligned DC Power Green Cross Line Laser Module

When cross line alignment work is processed on multiple targeting surfaces, users should have to find a quite professional measuring device as expected. In order to get quite convenient cross line generation on any targeting surface, once cross line alignment is processed with green cross line laser module, after quite easy connect with a DC input power supply, it will be workable with continuous green vertical and horizontal lines generation with accurate 90 degrees. Owing to the designed with super strong environmental stabilization and easy adjustment of cross line targeting direction, this cross laser alignment tool would be workable with clearest measuring result on any working surface easily.

In process of quite clear cross line alignment in distance, it is a key point to make use of excellent glass coated lens. Before this laser device is available on the market, this 532nm green cross line laser module is passing through quite strict tests, including super rapid electric current adding test, alternative high and low temperature changing test and up to 24 hours aging preventing test. In long term cross line alignment work, it is always getting excellent laser light cycling use and keeping highly stable green two perpendicular lines with accurate 90 degrees.
When green cross line laser module is used as an accessory part of any other industrial machine or device, it would be workable continuously. It is adopting external DC input power supply as its electric power source. There is leaving enough space for its cooling system. At the same time, when it is accepting wide range electric current within 100V to 240V, this cross laser alignment tool is applied for majority of countries and regions, and then making sure of quite convenient cross line projection on any targeting surfaces efficiently.
No matter what kind of working environments, when green cross line laser module is designed with quite durable aircraft used aluminum alloy housing tube, it is bearing of multiple kinds of harsh occasions. It is keeping highly stable cross line generation under long term work. When this alignment laser is properly installed and adjusted, within daily operating time of 8 to 10 hours, after enough time reserving for laser module tube cooling down, it is just maintaining the best laser light cycling use and highly stable green cross line generation on any working place. Only if users are wearing proper 532nm wavelength preventing laser safety glasses and avoiding eye exposure to thermal energy, it is just achieving the most secured cross line generation perfectly.

The Finest Line Emitted 532nm Green Line Laser Module

In any working occasion where users are trying to make highly clear and fine line projection at much longer work distance than formal hand reaching, it would be an excellent substitute choice for users to use advanced laser tech applied 532nm green line laser module. It is generating highly bright and visible green laser beam from 532nm green DPSS laser system, on basis of quite low laser beam divergence. When it is getting easy connect with a DC input power supply, this laser line generator is just workable with the finest line projection on any working surfaces effectively.

It is the best experience to make line alignment with 532nm green line laser module at quite long distance and high lighting working occasion. Comparing with any visible red, violet or blue laser module devices, owing to its middle range wavelength among all visible optic spectrum, it has just made this laser line generator project the most easily absorbed and high sensitivity green laser light emission from beam aperture. Unless it is being used under sunlight, this 532nm green laser device is just keeping the clearest and the most accurate green reference line projection while comparing with any other visible laser devices.
Owing to the excellent use of separate crystal lens or glass coated lens, comparing with any simple plastic coated lens, this green line laser module is generating highly fine and straight line projection in distance. Not the same as any formal line drawing or line printing work, it gets no appearance of laser light decay or blur, also having no need to spend time on prior line positioning work. The whole process of laser line alignment will not disappear once it is being used for laser cutting, sand milling or other industrial precise device manufacturing works. The operation of this laser line generator just assure the most steady processing of any raw material, and ensuring the most competitive price and efficient processing of any raw material surface.
If users are worrying about line aligning accuracy, the operation of green line laser module is getting freely selected output power and optic lens degree, and achieving quite easy and accurate line alignment constantly. In order to get highly clear and no decay light line projection on various targeting surfaces, it is used with the assistance of a laser alignment mounting bracket. Noncontact green alignment laser targeting is getting no relying on professional skills and extra time on line printing, making sure of the easiest line generation for any industrial and high tech works. According to proper wearing of 532nm wavelength preventing laser safety glasses and enough protection of eyes from intense thermal energy, it will get free and no mistake line alignment perfectly.

Immediate Aligned Separate Crystal Lens Green Line Laser Module

In any occasion where users are trying to make clear line alignment at a much longer distance than formal hand reaching, with the assistance of advanced 532nm green DPSS laser tech, it would be the most marvelous experience to make use of a high brightness green line laser module. When highly intense and bright green laser light is generated from 532nm green DPSS laser system, it is keeping the most easily absorbed and the most visible green reference line projection in distance. When this laser line generator is properly installed and adjusted to correct position, it will always assure highly clear and no mistake line generation on any targeting surface effectively.

When highly intense green laser beam is generated from beam aperture, even though it is only getting quite low power of 5mW, this 5mW green line laser module is enough to get highly clear line projection for inner room and other close distance line alignment work. In occasion that line alignment is processed at quite long work distance and high lighting working occasion, only if this laser line generator is selected with higher power up 50mW to 100mW, it will get highly clear line projection within the maximum work distance of 25 meters. In formal line measuring work fields, in order to achieve desired line alignment accuracy, it is getting the proper use without sunlight.
In order to get the most satisfied line alignment on multiple targeting surfaces, instead of the use of simple plastic coated lens, green line laser module is employing even better quality separate crystal lens. It is generating non Gaussian laser beam distribution, and then achieving highly uniform green reference line up to 80%. Especially in occasion that green laser line alignment is processed at quite long distance, green line is keeping the same brightness from middle part towards ends, and then assuring the highest level of accuracy line projection for any high tech and industrial precise device manufacturing works perfectly.
According to proper use of a laser alignment mounting bracket, even though there are some of working places are not easy to reach, this accessory part of green line laser module is just getting the most convenient installation and adjustment, and then getting quite clear and rapid line projection on any vertical or horizontal surface easily. It is a focused beam alignment laser line module device. Any time users are making quite easy screw of laser beam aperture, highly intense green laser beam is converted into a highly fine green reference line, and then achieving the clearest line generation for any industrial and high tech line measuring work fields effectively.

Accurate Aligned Glass Coated Lens Green Laser Diode Module

If there is a quite long time spending for user to make dot measuring work with formal manual dot targeting tool, such as a sticker, laser pointer or others, it is far more enough to maintain good work efficiency for modern time machinery processing works. In order to make real dot alignment work much easier and more convenient, it is just a nice solution to make use of glass coated lens green laser diode module. It is generating highly clear and bright green laser light from 532nm green DPSS laser system, equipped with excellent thermal emitting system and constant electric power source, it is getting reduced relying on professional skills, and then achieving highly clear and accurate dot alignment on any working surface effectively.

When dot alignment is processed for quite long time, it is in need of serious strict requirement of high beam stability. This green laser diode module is employing qualified aircraft used aluminum alloy housing tube, together with its inner metal heat sink cooling system, it is always getting superior nice thermal conductivity, and highly stable green reference dot projection in continuous work. When it is installed properly on any other device or equipment, this compact structure made green laser device would just maintain highly stable performance under those of complex working environments, including mechanical shocking, calibration or moving etc.
On multiple targeting surfaces, green laser diode module is always required to generate super clear and accurate dot generation in distance. It is adopting qualified glass coated lens, equipped with quite low beam divergence of less than 1mard, green reference dot is just obtaining the most compact dot diameter. For instance, when dot aligning is processed at 10cm distance, it is only 0.3mm, which is only 1mm to 2mm at about 2 meters work distance from beam aperture to desired targeting surface. Whatever kind of working surface, users can make quite easy adjustment of laser beam focus. Highly intense green light is concentrated into the most compact size green dot, and then achieving high level of accuracy dot alignment in distance perfectly.
According to the designed with 16mm and 26mm diameter tube diameter, green laser diode module is getting quite convenient installation on any targeting surface. Owing to specially designed electric wires extension for green laser and DC input power supply, it is getting freely installed distance within 0.3 meter to 3 meters, and then making sure of quite convenient line projection on any targeting surface. Whenever highly intense and powerful green light and thermal energy are produced from beam aperture fo green alignment laser, users should wear 532nm wavelength preventing laser safety glasses so as to achieve highly secured and free dot alignment constantly.